FREE DELIVERY TODAY - Place your 1st order.

Until the end of the sale:
00
days
00
hours
00
minutes
00
sec.

Simrad RF45X Rugged Rudder Feedback Unit w/Tansmission Link, 2M Cable & Junction Box

Large commercial yachts track rudder geometry through severe bilge washdowns using this Simrad RF45X marine autopilot, which transmits a +/- 45-degree sweep via double-bearing die-cast metal construction across 12V or 24V processors at 1.8 kg.

  • Double-bearing design ensures commercial mechanical durability
  • IP67 submersible housing prevents bilge flooding
  • Transmits precise 45-degree rudder angle sweep
  • Operates reliably from -25°C to 70°C
$398.00

Products are almost sold out

This product is about to run out

available only:

7

In Stock

Wholesale Price
Request for Quotation
Add to wishlist
Compare
SKU: SIM-RF45X-FB Category: Brand:
SKU:

SIM-RF45X-FB

Description

The Simrad RF45X Rugged Rudder Feedback Unit is a medium-duty physical rudder-angle sensor for compatible Simrad autopilot and rudder-angle-indicator installations. It mounts close to the rudder stock and connects mechanically to the tiller arm through a transmission link at a 1:1 ratio. The RF45X sends rudder-angle information to the autopilot computer and can also provide a separate signal for a standalone rudder-angle indicator. [297][300]

This kit includes the transmission linkage, a 2 m cable, and a junction box. The RF45X is mechanically similar to the older RF45 but is repairable rather than a sealed disposable unit. Its variable-frequency, pulse-width-modulated output is selectable for compatible Simrad and Robertson autopilot computers, including legacy ACXX, J3XX, J50, AP45, and AP9 Mk3 architectures; confirm the exact input compatibility before purchase. [297][298]

Key Specifications

  • Medium-duty physical rudder-feedback unit for compatible Simrad commercial and larger-vessel autopilot installations.
  • Mounts near the rudder stock and connects to the tiller arm through a 1:1 mechanical transmission linkage.
  • Supplies a variable-frequency pulse-width-modulated rudder-angle signal to a compatible autopilot computer.
  • Can provide a second variable-current signal for a compatible standalone rudder-angle indicator.
  • Includes a transmission link, 2 m cable, and junction box.
  • Features a repairable design mechanically based on the earlier Simrad RF45 feedback unit.
  • Supports compatible 12V or 24V installations, with 24V use applicable to supported standalone rudder-angle-indicator arrangements.
  • Uses a ruggedized, corrosion-resistant housing with a stated IP67 rating and an operating range of minus 25°C to 70°C.

Installation Considerations

Mount the feedback unit on a rigid, flat surface close to the rudder stock. Centre the vessel rudder before connecting and adjusting the transmission linkage, then ensure the linkage moves freely without binding, collision, side load, or reaching the sensor’s mechanical limit before full rudder travel.

The supplied 2 m cable and junction box provide a local connection point, but cable routing to the autopilot computer must be planned separately. Keep signal wiring protected from moving steering components, heat, moisture ingress, and high-current cables. Complete the autopilot’s rudder-feedback calibration and verify accurate port, starboard, and amidships readings before sea trial.

Before Ordering

Confirm the autopilot computer accepts the RF45X output type, verify the required jumper configuration, check access to the rudder stock and tiller arm, confirm 1:1 transmission-link geometry, allow for the 2 m supplied cable and junction-box location, provide a protected IP67-appropriate mounting area, and verify the required 12V or 24V system configuration before purchase.

Simrad RF45X Rugged Rudder Feedback Unit w/Tansmission Link, 2M Cable & Junction Box

Drive TypeHeavy-Duty Rudder Feedback Unit
Pump/Ram CapacityN/A (Sensing Unit)
Flow Rate / SpeedHigh-Resolution Position Output
Max PressureMechanical Transmission Linkage
Cylinder CompatibilityCommercial & Large Yacht Rudders
Operating Voltage12V / 24V DC Support
Peak Current DrawIndustrial Signal Level
Average Power DrawLow-Power Solid State Sensing
Motor TypeFrequency Modulated (Long Run)
Computer CompatibilityAC70, AC80, NAC-3, J300X
Port Size / ThreadStainless Steel Linkage Rod
Drive ConnectionJunction Box Multi-Wire Link
Rotation/Stroke Direction+/- 45 Degree Precise Sweep
Mounting TypeDeck/Bulkhead Rugged Mount
Housing MaterialCorrosion-Resistant Die-Cast Metal
Waterproof RatingIP67 Submersible Grade
Operating Temperature-25°C to +70°C Extreme Grade
Length (Overall)Variable Transmission Link Rod
Width/DiameterHeavy-Duty Industrial Chassis
Weight1.8 kg (Full Kit w/ Junction Box)
Included AccessoriesLinkage, 2M Cable, Junction Box
Key Mechanical FeatureDouble bearing design for commercial use

Reviews

There are no reviews yet.

Be the first to review “Simrad RF45X Rugged Rudder Feedback Unit w/Tansmission Link, 2M Cable & Junction Box”

You may also like…

Shopping Cart

No products in the cart.

Free Shipping on All Orders Over $1,000

Log in

You dont have an account yet? Register Now

Type the product you want to search for and press enter.