Raymarine Evolution EV-150 Hydraulic Autopilot System Pack

Description

Build a compatible hydraulic autopilot installation around the Raymarine Evolution EV-150 Hydraulic Autopilot System Pack. The package includes a p70Rs control head, EV-1 nine-axis sensor, ACU-150 actuator control unit, and Type 1 hydraulic pump. The 12V system supports hydraulic rams from 4.9 to 14 cubic inches, while the pump uses 1/4-inch NPT fittings and provides a 1000 cc per minute fixed flow rate.

The Type 1 pump is rated at 50 bar, and peak current draw reaches 15A under full load. Typical draw ranges from 3A to 7A. The p70Rs uses a 110 mm by 115 mm flush-mount control-head format, while the ACU mounts on a bulkhead. The stated 6.8 kg pack weight, SeaTalkng network connections, and pump, sensor, display, and ACU locations should be planned before installation.

Key Specifications of the Raymarine Evolution EV-150 Hydraulic Autopilot System Pack

• The package includes a p70Rs control head, EV-1 nine-axis sensor, ACU-150, and Type 1 hydraulic pump for complete system integration.
• Hydraulic-cylinder compatibility ranges from 4.9 to 14 cubic inches, requiring confirmation of installed steering-ram volume before selection.
• The Type 1 pump provides 1000 cc per minute fixed flow through 1/4-inch NPT fittings for compatible hydraulic steering systems.
• A 12V DC supply supports the system, with 3A to 7A typical draw and 15A peak current under full load.
• The hydraulic pump is rated at 50 bar, requiring compatible plumbing, fittings, and steering components within the specified pressure range.
• SeaTalkng connects the control head, sensor, and actuator control unit through the stated Evolution digital-network architecture.
• The p70Rs uses a 110 mm by 115 mm control-head format, while the ACU requires a suitable bulkhead mounting location.

System Integration and Hydraulic Layout

This Raymarine package includes the central components needed for a compatible hydraulic autopilot arrangement, but the vessel’s existing steering cylinder, hydraulic lines, helm pump, electrical supply, and installation hardware must be assessed before purchase. The EV-1 sensor provides the stated nine-axis sensing function, while the ACU-150 controls the Type 1 pump through SeaTalkng system connections.

The package is intended for hydraulic steering rams between 4.9 and 14 cubic inches. Confirm pump location, hose routes, fitting compatibility, bulkhead mounting, 12V circuit protection, sensor placement, and p70Rs display location before installation. Follow Raymarine documentation for hydraulic plumbing, electrical wiring, network connections, configuration, and commissioning.

Why Choose the Raymarine Evolution EV-150 Hydraulic Autopilot System Pack

The Raymarine Evolution EV-150 Hydraulic Autopilot System Pack combines a p70Rs control head, EV-1 nine-axis sensor, ACU-150, Type 1 pump, SeaTalkng network, and 12V power architecture. Its 4.9 to 14 cubic inch ram range, 1000 cc per minute pump flow, 50 bar rating, 1/4-inch NPT fittings, 15A peak draw, and 6.8 kg pack weight provide specific system-selection details for a hydraulic autopilot installation.

Setup and Network Considerations

Confirm that the vessel uses a hydraulic steering cylinder within the 4.9 to 14 cubic inch compatibility range before selecting this package. Plan the Type 1 pump mounting location, hydraulic hose routes, 1/4-inch NPT fittings, ACU-150 bulkhead position, EV-1 sensor placement, p70Rs flush-mount space, SeaTalkng backbone, and 12V circuit for up to 15A peak draw. Follow Raymarine installation instructions for the complete system.

Warranty and Support

Raymarine warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for this EV-150 pack. Mulmarine.com can help you review steering-cylinder volume, pump flow, hydraulic fitting requirements, sensor and control-head placement, SeaTalkng network planning, 12V circuit capacity, and required installation components before purchase. Review the applicable Raymarine warranty coverage and documented package contents before ordering.

Before Ordering the Raymarine Evolution EV-150 Hydraulic Autopilot System Pack

Confirm that your vessel has a compatible hydraulic steering cylinder between 4.9 and 14 cubic inches. You should verify the Type 1 pump location, 1/4-inch NPT hydraulic fittings, hose routing, ACU-150 bulkhead space, EV-1 sensor placement, p70Rs display opening, SeaTalkng network capacity, and 12V circuit protection for up to 15A peak draw before purchase.