Hatteland Series X – Generation 2 (G2) 17 Multi-Power Display w/Buttons – AC/DC 24V

Description

The Hatteland Series X G2 17 MMD is a type-approved marine monitor for a bridge or enclosed control console using separate radar, chart, ECDIS, or computer sources. Its physical front buttons make screen adjustments straightforward when the operator is wearing gloves or working in a moving vessel. This is a display-only unit, not a chartplotter or fishfinder.

The 1280 x 1024 SXGA panel is a good match for older marine systems that still output a 4:3 image. DVI-D, DisplayPort, HDMI, and VGA accept the main video formats listed, while USB supports OSD control. Multi-power input covers 115/230V AC and 24V DC installations. The 350 cd/m² brightness suits a controlled bridge, and the IP22 rear means it should not be mounted where water can collect behind the panel.

Key Features

• 17-inch SXGA display – Provides a large bridge monitor for radar, chart, or computer output.
• 1280 x 1024 resolution – Matches the listed 4:3 source format.
• Front OSD buttons – Allows direct adjustment without relying on touchscreen control.
• DVI-D, DisplayPort, HDMI, and VGA – Accepts several common marine video inputs.
• 115/230V AC and 24V DC input – Fits both vessel mains and DC power installations.

Who Is This For?

This industrial marine monitor suits enclosed bridges, workboats, and type-approved marine control stations using SXGA source equipment. It is not ideal for an exposed open helm or a buyer expecting onboard charts, sonar, or GPS; the rear protection is IP22 and the unit depends on an external source.

Compatibility

Confirmed connections include DVI-D, DisplayPort, HDMI, VGA, SCOM, USB for OSD, and the listed multi-power input. The supplied information does not identify a specific chartplotter, radar, sonar, NMEA 2000, or NMEA 0183 system. No named incompatible system was provided; verify source resolution, control interfaces, and protected mounting requirements before installation.

Technical Specifications

• Brand: Hatteland Technology
• Model: HD 17T22 MMD
• Part number: HD17T22MMD-MA1-FAGA
• Display: 17-inch TFT active matrix LED display with front buttons
• Resolution: 1280 x 1024 SXGA
• Brightness: 350 cd/m² typical
• Video interfaces: DVI-D, DisplayPort, HDMI, VGA, SCOM
• Control: USB for OSD
• Power: 115/230V AC and 24V DC; 25W typical
• Protection: IP66 front and IP22 rear

Warranty & Support

Hatteland Technology provides a 2-year standard warranty. The supplied specifications do not state warranty exclusions or service procedures.

The Hatteland 17 MMD is a practical choice for an enclosed bridge that still relies on SXGA source equipment and physical monitor controls. It uses less power and space than the 24- and 26-inch models, but the 4:3 panel is less suited to modern widescreen charts. Choose it for a compatible commercial source system, not for a new all-in-one marine electronics installation.