FREE DELIVERY TODAY - Place your 1st order.
Raritan MK2 Marine Rudder Angle Indicator Meter
The Raritan MK2 Marine Rudder Angle Indicator Meter presents rudder position through a dedicated display for vessel steering monitoring.
- MK2 identifies the indicator model.
- Rudder meter displays steering angle.
- Marine display supports helm monitoring.
- Indicator presents position information.
- Raritan identifies the manufacturer.
Products are almost sold out
available only:
6In Stock
Description
The Raritan MK2 is a dedicated rudder angle indicator for boats that need a clear steering-position reading at the helm. Its analogue pointer shows the rudder moving through port and starboard, which is especially useful during docking, backing, and low-speed maneuvering. The MK2 is a display meter only and requires a matching Raritan rudder feedback transmitter.
The larger 4-1/2-inch housing can be surface mounted or fitted into a console panel, making it useful on trawlers, workboats, older cruisers, and vintage wooden yachts. It supports 12V or 24V configurations and draws up to 60mA with the backlight operating. The analogue resistive input works with traditional mechanical or hydraulic steering arrangements. There is no NMEA 2000, NMEA 0183, GPS, or network connection, so sender compatibility is the key installation check.
Key Features
- Large analogue rudder pointer – Makes steering position easy to read during docking and close maneuvering.
- 4-1/2-inch housing – Provides a larger surface-mounted gauge footprint.
- 12V or 24V configurations – Fits common vessel electrical systems.
- Internal incandescent backlighting – Provides rudder visibility at night.
- IPX6 front protection – Helps protect the gauge face from splash.
Who Is This For?
This marine rudder angle indicator suits displacement trawlers, inboard cruisers, commercial workboats, and vintage wooden yachts. It is not ideal for a boat using only digital NMEA instruments or a buyer who does not have the matching Raritan rudder sender.
Compatibility
Confirmed compatibility includes a standard analogue resistive signal from a matching Raritan rudder feedback transmitter and traditional mechanical quadrant, tiller-arm, or hydraulic-ram rudders. The supplied information does not identify NMEA 2000, NMEA 0183, Garmin, Raymarine, B&G, Simrad, autopilot, or third-party sender compatibility. No named incompatible system was provided.
Technical Specifications
- Brand: Raritan Engineering
- Model: MK2 / MK2-12V
- Device type: Analogue rudder angle indicator
- Reading: Rudder angle in degrees port/starboard
- Signal: Standard analogue resistive
- Sender: Matching Raritan rudder feedback transmitter required
- Voltage: 12V or 24V configuration
- Power draw: 60mA maximum with backlight
- Housing: 114mm / 4-1/2-inch surface-mount case
- Water rating: IPX6 front
Warranty & Support
The supplied specifications do not state a warranty term. Confirm current Raritan warranty coverage and exclusions before purchase.
The MK2 is the larger surface-mount alternative to the MK5, giving the helm a bigger rudder pointer for easier reading from a wider steering position. The trade-off is the same analogue dependency: it needs a compatible Raritan sender and direct wiring. Choose it for a traditional steering system where rudder position matters more than network integration.
| Brand | Raritan Engineering |
| Full Model SKU/Code | MK2 / MK2-12V |
| Country of Origin | USA |
| Gauge Type | Single-Function Dedicated Analog Position Indicator |
| Monitored Parameters | Rudder Angle Position (Degrees Port/Starboard) |
| Data Bus / Protocol Compatibility | Standard Analog Resistive (Requires direct linkage to Raritan matching rudder feedback transmitter sender unit) |
| Engine Brand Compatibility | Universal Compatibility with traditional mechanical quadrant, tiller arm, or hydraulic ram rudders |
| Display Technology & Backlighting | Mechanical Sweeping Pointer Dial with Internal Incandescent Perimeter Panel Backlighting |
| Bezel/Housing Diameter | 114 mm / 4-1/2" Large Surface Mount Case Size |
| Mounting Method / Cutout Size | Surface Mount Enclosure Housing or Console Panel Mount with Rear Studs |
| Operating Voltage | 12 Volts DC / 24 Volts DC Adaptive Configuration Options |
| Current Draw / NMEA 2000 LEN | Max Total Load Draw with Backlighting Active: 60 mA |
| Waterproof Rating | IPX6 Front Facing Display Splash Defended Trim Seal |
| Lens Technology | Scratch-Resistant Flat Marine Glass Protective Lens |
| Material & Bezel Finish | Corrosion-Free Composite Shell Enclosure with Matte Black Bezel Frame Outer Ring |
| Number of Supportable Engines | Single Vessel Steering Rudder Alignment Geometry Asset |
| Dry Weight | 0.45 kg / 1.0 lbs (Display Meter Core Unit Only) |
| Application | Real-time mechanical alignment monitoring at the helm for displacement trawlers, inboard cruisers, commercial workboats, and vintage wooden yachts tracking docking tracks (20-75 ft boat lengths) |
You must be logged in to post a review.













Reviews
There are no reviews yet.