AB Oceanus 12 VST – 12-Foot Fiberglass Console Performance RIB

Description

Using a deep-V hand-laid fiberglass hull with a double molded deck system, the AB Inflatables Oceanus 12 VST is a 3.66 m, or 12 ft, performance center-console rigid inflatable boat. Its hand-laid fiberglass deck uses an integrated molded non-skid pattern, while three buoyancy chambers use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams. The listed 220 kg, or 485 lb, net weight and 35 L, or 9.2 gal, built-in aluminum fuel tank should be assessed before lifting and rigging.

The boat has a five-person ISO capacity and a maximum payload rating of 550 kg, or 1,212 lb. It requires a 20-inch long-shaft outboard, with 30 HP recommended, 40 HP maximum, and 105 kg, or 231 lb, maximum engine weight. Leafield C7 Push-Push valves and pressure-relief valves are specified, while CE Category C is listed for inshore and coastal conditions.

Key Specifications of the AB Inflatables Oceanus 12 VST Rigid Inflatable Boat

• The performance center-console RIB measures 3.66 m, or 12 ft, overall and has a stated net weight of 220 kg.
• A hand-laid deep-V fiberglass hull with double molded deck construction defines the listed rigid-hull arrangement for this compact console RIB.
• The fiberglass deck uses an integrated molded non-skid pattern, establishing the specified deck-surface configuration for the supplied center-console layout.
• Three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the stated inflatable tube construction.
• Maximum ISO passenger capacity is five persons, while the listed maximum payload capacity is 550 kg, or 1,212 lb.
• A 35 L, or 9.2 gal, built-in aluminum fuel tank establishes the listed onboard fuel-storage configuration for this RIB.
• A 20-inch long-shaft outboard is required, with 30 HP recommended and 40 HP maximum power specified for propulsion selection.

Hull, Deck, and Capacity

This AB Inflatables rigid inflatable boat has an internal length of 2.70 m, or 8 ft 10 in, and an internal width of 0.89 m, or 2 ft 11 in. The specified tube diameter is 0.43 m, or 17 in. Its deep-V fiberglass hull, double molded deck system, and three buoyancy chambers establish the stated structural configuration.

Included equipment consists of a fiberglass console with windshield and grab rail, integrated bow locker and cushion, helm seat with under-seat storage, built-in fuel tank, navigation lights, automatic bilge pump, and stainless steel cleats. Keep the selected outboard, passenger count, payload, fuel capacity, and engine limits within the stated product specifications.

Why Choose the AB Inflatables Oceanus 12 VST Rigid Inflatable Boat

The Oceanus 12 VST rigid inflatable boat combines a 3.66 m fiberglass deep-V hull with a double molded deck, center console, 35 L fuel tank, pressure-relief valves, and three ORCA CSM buoyancy chambers. Buyers can compare its 220 kg net weight, five-person ISO capacity, 550 kg payload rating, 20-inch long-shaft requirement, 30 HP recommended power, 40 HP maximum power, and 105 kg engine limit with other compact console RIB configurations.

Setup and Outboard Considerations

The supplied configuration includes a fiberglass console with windshield and grab rail, bow locker and cushion, helm seat with under-seat storage, built-in fuel tank, navigation lights, automatic bilge pump, and stainless steel cleats. Confirm the 20-inch long-shaft outboard configuration before rigging, then match engine output to the stated 30 HP recommendation, 40 HP maximum, and 105 kg engine-weight limit. Inflate all three buoyancy chambers through the specified Leafield C7 valves and observe the listed pressure-relief valve arrangement.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and fiberglass hull structure. Mulmarine.com can help you review the 3.66 m hull dimensions, 220 kg net weight, 35 L fuel-tank specification, 20-inch long-shaft outboard requirement, and stated passenger, payload, and engine limits against your lifting, trailer, dock, and propulsion plan before purchase. Review the stated warranty coverage and documented included equipment before ordering.

Before Ordering the AB Inflatables Oceanus 12 VST Rigid Inflatable Boat

Confirm that your lift, trailer, dock, and storage plan supports the 3.66 m overall length and 220 kg net weight. You should use a 20-inch long-shaft outboard, select 30 HP as the recommended power level, avoid exceeding 40 HP or 105 kg engine weight, confirm the 35 L fuel-tank configuration, and remain within the five-person and 550 kg maximum capacity limits.