Aquaglide Anvil

Description

Constructed from Duratex 0.90 mm reinforced PVC, theAquaglide Anvilprovides a climbing wall and traverse-beam element for Aquapark circuit layouts. The module inflates to 10 ft by 8 ft by 5 ft, supports four concurrent users, and weighs 79 lbs when dry. Its stated minimum water-depth clearance zone is 6 ft.

Vario-Lock 10 provides the listed two-sided end-line connection system. Four heavy-duty marine-grade stainless steel D-rings provide the mooring points. The structural chamber operates at the listed 2.0 PSI pressure.

Key Features of the Anvil Circuit Obstacle

• Duratex 0.90 mm reinforced PVC forms the listed climbing wall and traverse-beam structure.
• Inflated dimensions measure 10 ft by 8 ft by 5 ft.
• Up to four users can occupy the circuit obstacle at the same time.
• A 6 ft minimum water depth provides the listed safety-clearance zone.
• The structural chamber operates at the listed 2.0 PSI pressure.
• Vario-Lock 10 provides the listed two-sided end-line connectivity.
• Four marine-grade stainless steel D-rings provide the listed mooring points.
• The 79 lbs dry weight supports handling and water-based setup planning.

Use and Capacity

The Anvil is classified as an Aquapark circuit obstacle with a climbing wall and traverse beam. It supports up to four concurrent users. the listed 6 ft minimum water depth provides the listed clearance zone beneath the 5 ft-high inflated module.

Operators should maintain the 2.0 PSI structural pressure and use Vario-Lock 10 compatible end-line connections. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or specific linked modules as included.

Materials and Construction

Duratex 0.90 mm, 1000-denier reinforced PVC forms the listed commercial-grade inflatable structure. Vario-Lock 10 straps provide the listed two-sided connection system. Four heavy-duty marine-grade stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing surfaces, traverse areas, D-rings, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide circuit obstacle inflates to 10 ft by 8 ft by 5 ft and weighs 79 lbs when dry. Installers should choose a location with at least 6 ft of water depth, allow room for the full module footprint, plan the two-sided Vario-Lock 10 connection layout, and identify mooring positions before deployment.

Inflate the structural chamber to the listed 2.0 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing areas, traverse surfaces, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing surfaces, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Anvil carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 6 ft of depth and space for the 10 ft by 8 ft by 5 ft obstacle. Plan for no more than four concurrent users, maintain 2.0 PSI structural pressure, use Vario-Lock 10 compatible end-line connections, and account for the 79 lbs dry weight during setup.