Aquaglide Freefall Supreme TR

Description

With a stated 10-person dynamic capacity, theAquaglide Freefall Supreme TRcombines a double slide with a vertical climbing tower in an high-drop hub. Its Duratex 1100-denier reinforced PVC structure inflates to 25 ft 7 in by 12 ft 6 in by 16 ft 5 in. The high-rigidity chamber operates at 2.5 PSI.

Six heavy-duty marine-grade 316 stainless steel D-rings provide the listed mooring points. The module requires a 10 ft deep-water fall-zone clearance and weighs 361 lbs when dry. HA Weld seams form the listed structural seam technology.

Key Features of the Freefall Supreme TR

• Duratex 1100-denier reinforced PVC forms the listed double-slide and vertical-tower construction.
• HA Weld seams provide the listed hot-air welded structural seam technology.
• Inflated dimensions measure 25 ft 7 in by 12 ft 6 in by 16 ft 5 in.
• Up to ten users can occupy the module within its stated dynamic capacity.
• A 10 ft water depth provides the listed deep-water fall-zone clearance.
• The high-rigidity chamber operates at the listed 2.5 PSI pressure.
• Six heavy-duty marine-grade 316 stainless steel D-rings provide the listed mooring points.
• The 361 lbs dry weight supports transport and water-based deployment planning.

Use and Capacity

The Freefall Supreme TR is classified as an high-drop double slide and vertical climbing tower hub. It supports up to ten simultaneous users as a stated dynamic capacity. The required 10 ft water depth provides the listed deep-water fall-zone clearance around the 16 ft 5 in-high inflated structure.

Operators should maintain the listed 2.5 PSI high-rigidity chamber pressure. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or modular connection system as included.

Materials and Construction

Duratex 0.90 mm, 1100-denier reinforced PVC forms the listed commercial inflatable structure. HA Weld hot-air welded seams provide the listed structural seam technology. Six heavy-duty marine-grade 316 stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing surfaces, double-slide areas, D-rings, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide tower inflates to 25 ft 7 in by 12 ft 6 in by 16 ft 5 in and weighs 361 lbs when dry. Installers should choose a location with at least 10 ft of water depth, allow room for the full structure and fall zone, and identify six mooring positions before deployment.

Inflate the high-rigidity chamber to the listed 2.5 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing surfaces, slide areas, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing areas, slide surfaces, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Freefall Supreme TR carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 10 ft of depth and space for the 25 ft 7 in by 12 ft 6 in by 16 ft 5 in tower. Plan for no more than ten simultaneous users, maintain 2.5 PSI chamber pressure, account for the 361 lbs dry weight, and arrange six mooring points.