Aquaglide Horizontal Mooring Line (Pair)

Description

Connect in-water Aquapark mooring points with theAquaglide Horizontal Mooring Linepair. Each heavy-duty low-stretch braided polypropylene line adjusts continuously to 20 ft. The two-line set carries a stated safe working load of 1,000 lbs per line and weighs 7 lbs combined.

Marine-grade 316 stainless steel snap hooks and tensioners form the listed hardware. This product is a commercial anchor-line and module-tethering rig rather than an inflatable module. Two complete mooring lines are included in the pair.

Key Features of the Horizontal Mooring Line Pair

• Two complete low-stretch braided polypropylene mooring lines are included in the listed pair.
• Each line adjusts continuously up to the listed 20 ft length.
• A 1,000 lbs safe working load applies to each individual mooring line.
• Marine-grade 316 stainless steel snap hooks form the listed attachment hardware.
• Stainless steel tensioners provide the listed line-adjustment hardware.
• The pair weighs 7 lbs at the listed combined dry-weight figure.
• The rig is classified for commercial in-water anchoring and module tethering.

Use and Capacity

The Horizontal Mooring Line is classified as a commercial in-water anchor line and module-tethering rig. the listed set includes two complete lines. Each line has a stated safe working load of 1,000 lbs and continuously adjusts up to 20 ft.

Operators should assess the intended module, attachment points, anchoring arrangement, and load requirements before deployment. The available product details do not list anchors, modules, mooring layout, water depth, or additional hardware as included.

Materials and Construction

Heavy-duty low-stretch braided polypropylene forms the listed line construction. Marine-grade 316 stainless steel snap hooks and tensioners provide the listed attachment and adjustment hardware. The 20 ft line length adjusts continuously within the listed range.

Water, salt, sand, and debris can still collect around the braided line, snap hooks, tensioners, and connection points. Rinse and inspect the product regularly. Follow manufacturer guidance for attachment, tensioning, load management, cleaning, and storage.

Installation and Setup

The Aquaglide pair contains two adjustable 20 ft mooring lines and weighs 7 lbs combined. Installers should identify suitable anchor points and module attachment points, then establish the required line length and tension according to the intended in-water mooring arrangement.

The available product details do not list anchor hardware, module-specific connection instructions, water-depth requirements, or a complete mooring layout. Consult manufacturer documentation before deploying the tethering rig.

Care and Operating Notes

Rinse the polypropylene lines, snap hooks, tensioners, and connection points with fresh water after use. Remove salt, sand, and debris before storage. Inspect the braided line, hook gates, tensioner movement, and visible connection hardware before deployment. Follow manufacturer instructions for attachment, tensioning, cleaning, storage, and approved replacement parts.

Warranty and Support

The Horizontal Mooring Line pair carries a 1-year limited manufacturer warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended mooring setup requires two continuously adjustable lines up to 20 ft long. You should compare the planned load on each line with the listed 1,000 lbs safe working load, verify the module and anchor attachment points, and account for the 7 lbs combined set weight. Consult manufacturer documentation for layout and tensioning requirements.