Aquaglide Freefall 6 Slide

Description

Providing a mid-range climbing wall and water slide layout, theAquaglide Freefall 6uses Duratex 0.90 mm reinforced PVC with HA Weld seams. The module inflates to 13 ft 9 in by 7 ft 10 in by 6 ft and supports three users within a stated 600 lbs total weight capacity.

Vario-Lock 10 provides the listed compatible end connections. Four heavy-duty marine-grade stainless steel D-rings form the mooring points. The main chamber operates at 2.0 PSI, while the required water-depth landing clearance is 6 ft.

Key Features of the Freefall 6 Slide

• Duratex 0.90 mm reinforced PVC forms the listed climbing-wall and water-slide construction.
• HA Weld seams provide the listed hot-air welded structural seam technology.
• Inflated dimensions measure 13 ft 9 in by 7 ft 10 in by 6 ft.
• Three users can occupy the module within the listed 600 lbs total weight capacity.
• A 6 ft minimum water depth provides the listed landing-clearance zone.
• The main chamber operates at the listed 2.0 PSI pressure.
• Vario-Lock 10 provides the listed compatible end-connection system.
• Four heavy-duty marine-grade stainless steel D-rings provide the listed mooring points.
• The 106 lbs dry weight supports transport and deployment planning.

Use and Capacity

The Freefall 6 is classified as a mid-range commercial inflatable climbing wall and water slide. It supports up to three users within the listed 600 lbs total weight capacity. The required 6 ft water depth provides the listed landing clearance beneath the 6 ft-high inflated structure.

Operators should maintain the listed 2.0 PSI main-chamber pressure and use Vario-Lock 10 compatible end connections. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or specific connection modules as included.

Materials and Construction

Duratex 0.90 mm, 1000-denier reinforced PVC forms the listed slide and climbing-wall structure. HA Weld hot-air welded seams provide the listed seam technology. Four heavy-duty marine-grade stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing surfaces, slide areas, D-rings, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide climbing wall and slide inflates to 13 ft 9 in by 7 ft 10 in by 6 ft and weighs 106 lbs when dry. Installers should choose a location with at least 6 ft of water depth, allow room for the full footprint and landing zone, plan the Vario-Lock 10 end connection, and identify four mooring positions before deployment.

Inflate the main chamber to the listed 2.0 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing surfaces, slide areas, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing surfaces, slide areas, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Freefall 6 carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 6 ft of depth and space for the 13 ft 9 in by 7 ft 10 in by 6 ft module. Plan for no more than three users within the 600 lbs total capacity, maintain 2.0 PSI main-chamber pressure, use Vario-Lock 10 compatible end connections, account for the 106 lbs dry weight, and arrange four mooring points.