Aquaglide Ocean Pool (4m x 4m)

Description

A 4 m by 4 m frame and weighted fine-mesh enclosure define theAquaglide Ocean Poolfloating swimming area. The exterior platform measures 13.1 ft by 13.1 ft, with a 10.5 ft by 10.5 ft usable interior pool area. A 4 in high-pressure drop-stitch platform forms the listed rigid frame.

The enclosure uses an 8 ft-deep weighted fine-mesh net identified for anti-jellyfish protection. Four marine-grade 316 stainless steel D-rings provide the listed mooring points. The pool operates within the listed 5.0 to 6.0 PSI inflation range and weighs 99 lbs when dry.

Key Features of the Ocean Pool 4m x 4m

• A 13.1 ft by 13.1 ft exterior frame defines the floating swimming enclosure.
• The usable interior pool area measures 10.5 ft by 10.5 ft.
• A 4 in high-pressure drop-stitch platform forms the listed rigid frame construction.
• An 8 ft-deep fine-mesh net provides the listed weighted enclosure system.
• The enclosure net is identified for anti-jellyfish protection.
• Operating pressure ranges from 5.0 to 6.0 PSI for the drop-stitch platform.
• Four 316 stainless steel D-rings provide the listed mooring attachment points.
• The 99 lbs dry weight supports handling and water-based deployment planning.

Use and Capacity

The Ocean Pool is classified as a Yacht and Resort floating safe swimming enclosure. Its exterior frame measures 4 m by 4 m, while the usable interior area measures 3.2 m by 3.2 m. The weighted fine-mesh net extends 2.4 m below the floating platform.

Operators should maintain the listed 5.0 to 6.0 PSI platform pressure. The available product details do not list a maximum user capacity, water-depth requirement, pump, anchor system, mooring lines, repair kit, or safety equipment.

Materials and Construction

A 4 in high-pressure drop-stitch platform forms the listed frame construction. The weighted fine-mesh enclosure net extends 8 ft below the platform and is identified for anti-jellyfish protection. Four marine-grade 316 stainless steel D-rings provide the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect on the drop-stitch platform, net, D-rings, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, mooring, net handling, cleaning, and storage.

Installation and Setup

The Aquaglide Ocean Pool measures 13.1 ft by 13.1 ft externally and weighs 99 lbs when dry. Installers should plan a suitable water location, allow for the 8 ft net depth, position four mooring points, and maintain clear access around the swimming enclosure before deployment.

Inflate the drop-stitch platform within the listed 5.0 to 6.0 PSI range. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, or safety equipment as included.

Care and Operating Notes

Rinse the platform, fine-mesh net, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris from the net and platform before storage or reinflation. Inspect the net, D-rings, seams, valves, and visible platform surfaces before operation. Follow manufacturer instructions for inflation, mooring, net care, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Ocean Pool carries a 3-year limited commercial warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location allows for the 13.1 ft by 13.1 ft exterior frame, 8 ft weighted-net depth, and four mooring points. You should maintain 5.0 to 6.0 PSI platform pressure, account for the 99 lbs dry weight during deployment, and plan around the 10.5 ft by 10.5 ft usable interior swimming area.