Aquaglide OG Lounge CX3

Description

Constructed with diamond-groove EVA decking and a central mesh basin, theAquaglide OG Lounge CX3provides a 10 ft by 10 ft VIP social lounge and soaker station. The Duratex 0.90 mm reinforced PVC structure supports six simultaneous users. Integrated backrests and molded cup holders form the listed lounge amenities.

The tube perimeter operates at 2.0 PSI, while the drop-stitch floor uses the listed 6.0 PSI pressure. Vario-Lock 10 provides the listed four-sided multi-hub integration. The platform weighs 84 lbs when dry.

Key Features of the OG Lounge CX3

• Duratex 0.90 mm reinforced PVC forms the listed VIP lounge and mesh-soaker-station structure.
• Diamond-groove EVA decking provides the listed traction surface across the platform.
• Inflated dimensions measure 10 ft by 10 ft by 2 ft 7 in.
• Six users can occupy the lounge within the listed simultaneous social capacity.
• Integrated backrests and molded cup holders form the listed lounge amenities.
• A center mesh basin provides the listed soaker-station feature.
• The tube perimeter operates at 2.0 PSI and the drop-stitch floor at 6.0 PSI.
• Vario-Lock 10 provides the listed four-sided multi-hub connection compatibility.
• The 84 lbs dry weight supports handling and water-based deployment planning.

Use and Capacity

The OG Lounge CX3 is classified as an Aquapark VIP social lounge and mesh soaker station. It supports up to six simultaneous users within the listed social lounge capacity. Integrated backrests, cup holders, and the center mesh basin form the listed lounge and soaker features.

Operators should maintain 2.0 PSI in the tube perimeter and 6.0 PSI in the drop-stitch floor. The available product details do not list mooring points, a pump, anchor system, mooring lines, repair kit, or safety equipment as included.

Materials and Construction

Duratex 0.90 mm reinforced PVC forms the listed lounge structure. Diamond-groove EVA decking provides the listed traction surface, while the center mesh forms the listed soaker basin. Vario-Lock 10 provides the listed four-sided multi-hub connection system.

Water, salt, sand, sunscreen residue, and debris can still collect around EVA decking, mesh, PVC surfaces, backrests, cup holders, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, cleaning, and storage.

Installation and Setup

The Aquaglide lounge inflates to 10 ft by 10 ft by 2 ft 7 in and weighs 84 lbs when dry. Installers should plan the Vario-Lock 10 layout, maintain clear access to the central mesh basin, and allow room around the lounge before deployment.

Inflate the tube perimeter to 2.0 PSI and the drop-stitch floor to 6.0 PSI. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, or safety equipment as included.

Care and Operating Notes

Rinse the EVA deck, mesh basin, backrests, cup holders, PVC surfaces, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris from the mesh and cup holders before storage or reinflation. Inspect the deck, mesh, backrests, cup holders, straps, seams, valves, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The OG Lounge CX3 carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the planned Aquapark layout uses Vario-Lock 10 compatible connections and has room for the 10 ft by 10 ft by 2 ft 7 in lounge. Plan for no more than six simultaneous users, maintain 2.0 PSI perimeter pressure and 6.0 PSI floor pressure, account for the 84 lbs dry weight, and allow access to the central mesh basin.