Aquaglide Ricochet/Recoil Slide – Large

Description

Connect a larger bouncer extension using theAquaglide Ricochet/Recoil Large Slide, a 8 ft 6 in modular water-slide attachment. The Duratex 0.90 mm reinforced PVC structure supports one rider within a stated 250 lbs maximum load. Its rigid slide chamber operates at the listed 2.0 PSI pressure.

Inter-lock heavy-duty straps provide the listed connection system for Ricochet and Recoil compatibility. Two lower marine-grade stainless steel D-rings form the mooring points. The module requires a 6 ft water-depth landing clearance and weighs 26 lbs when dry.

Key Features of the Ricochet/Recoil Large Slide

• Duratex 0.90 mm reinforced PVC forms the listed modular large-slide extension construction.
• Inflated dimensions measure 8 ft 6 in by 3 ft 3 in by 2 ft 7 in.
• One rider can use the slide within the listed 250 lbs maximum load.
• A 6 ft minimum water depth provides the listed landing-clearance requirement.
• The rigid slide chamber operates at the listed 2.0 PSI pressure.
• Inter-lock straps provide the listed Ricochet and Recoil connection compatibility.
• Two lower marine-grade stainless steel D-rings provide the listed mooring points.
• The 26 lbs dry weight supports handling and modular setup planning.

Use and Capacity

The Ricochet/Recoil Large Slide is classified as a universal modular water-slide extension for large bouncers. It supports one rider within the listed 250 lbs maximum load. Inter-lock connection straps provide the listed interface with Ricochet and Recoil compatible modules.

The required 6 ft water depth provides the listed landing clearance. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or a bouncer as included.

Materials and Construction

Duratex 0.90 mm heavy-duty reinforced commercial PVC forms the listed slide structure. Inter-lock heavy-duty straps provide the listed modular connection system. Two lower marine-grade stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around the slide surface, straps, D-rings, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, module connection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide slide inflates to 8 ft 6 in by 3 ft 3 in by 2 ft 7 in and weighs 26 lbs when dry. Installers should select a location with at least 6 ft of water depth, allow room for the slide and landing area, connect it through Inter-lock straps, and identify two mooring positions before deployment.

Inflate the rigid chamber to the listed 2.0 PSI operating pressure. The provided product data does not confirm a pump, bouncer, anchors, mooring lines, repair kit, or safety equipment as included.

Care and Operating Notes

Rinse the slide surface, Inter-lock straps, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect the slide, straps, D-rings, seams, valves, and visible PVC surfaces before operation. Follow manufacturer instructions for inflation, module connection, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Ricochet/Recoil Large Slide carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 6 ft of depth and room for the 8 ft 6 in by 3 ft 3 in by 2 ft 7 in slide. Plan for one rider within the 250 lbs maximum load, maintain 2.0 PSI pressure, use Inter-lock compatible Ricochet or Recoil modules, account for the 26 lbs dry weight, and arrange two mooring points.