Aquaglide Ridgeway 10

Description

Constructed from Duratex 0.90 mm reinforced PVC, theAquaglide Ridgeway 10provides a 10 ft by 10 ft climbing wall and circuit-link hub for modular Aquapark layouts. The module stands 5 ft high, supports four concurrent users, and requires a 6 ft minimum water-depth clearance zone.

Vario-Lock 10 provides the listed four-sided modular connection system. Four heavy-duty 316 stainless steel D-rings provide the mooring points. The main chamber operates at 2.0 PSI, and the listed dry weight is 84 lbs.

Key Features of the Ridgeway 10

• Duratex 0.90 mm reinforced PVC forms the listed commercial climbing-wall and circuit-link construction.
• Inflated dimensions measure 10 ft by 10 ft by 5 ft.
• Up to four users can occupy the module at the same time.
• A 6 ft minimum water depth provides the listed safety-clearance zone.
• The main chamber operates at the listed 2.0 PSI pressure.
• Vario-Lock 10 supports the listed four-sided modular connection layout.
• Four heavy-duty 316 stainless steel D-rings provide the listed mooring points.
• The 84 lbs dry weight supports transport and water-based setup planning.

Use and Capacity

The Ridgeway 10 is classified as an Aquapark Series modular climbing wall and circuit-link hub. It supports up to four concurrent users. The 6 ft minimum water depth provides the listed clearance zone beneath the 5 ft-high inflated module.

Operators should maintain the listed 2.0 PSI main-chamber pressure and use Vario-Lock 10 compatible connections for modular layouts. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or specific connected modules as included.

Materials and Construction

Duratex 0.90 mm, 1000-denier reinforced PVC forms the listed commercial-grade inflatable structure. Vario-Lock 10 straps provide the listed modular connection system. Four heavy-duty 316 stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing surfaces, straps, D-rings, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide climbing wall inflates to 10 ft by 10 ft by 5 ft and weighs 84 lbs when dry. Installers should choose a location with at least 6 ft of water depth, allow room for the full module footprint, plan the Vario-Lock 10 layout, and identify mooring positions before deployment.

Inflate the main chamber to the listed 2.0 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing surfaces, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing surfaces, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Ridgeway 10 carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 6 ft of depth and space for the 10 ft by 10 ft by 5 ft module. Plan for no more than four concurrent users, maintain 2.0 PSI main-chamber pressure, use Vario-Lock 10 compatible connections, and account for the 84 lbs dry weight during setup.