Aquaglide Sierra

Description

During linear Aquapark circuit setup, theAquaglide Sierraprovides a low-profile climbing, balance, and slide obstacle with two-sided Vario-Lock 10 integration. The Duratex 0.90 mm reinforced PVC module inflates to 10 ft by 8 ft by 3 ft 7 in and supports four concurrent users.

The chamber operates at the listed 2.0 PSI pressure. Four heavy-duty marine-grade stainless steel D-rings provide the mooring points. The module requires a 6 ft water-depth clearance landing zone and weighs 66 lbs when dry.

Key Features of the Sierra Obstacle

• Duratex 0.90 mm reinforced PVC forms the listed climbing, balance, and slide obstacle construction.
• Inflated dimensions measure 10 ft by 8 ft by 3 ft 7 in.
• Up to four users can occupy the obstacle at the same time.
• A 6 ft minimum water depth provides the listed landing-zone clearance.
• The inflatable chamber operates at the listed 2.0 PSI pressure.
• Vario-Lock 10 provides the listed two-sided linear integration system.
• Four heavy-duty marine-grade stainless steel D-rings provide the listed mooring points.
• The 66 lbs dry weight supports handling and water-based deployment planning.

Use and Capacity

The Sierra is classified as an Aquapark Series low-profile climbing, balance, and slide obstacle. It supports up to four concurrent users. the listed 6 ft minimum water depth provides the listed clearance landing zone around the 3 ft 7 in-high inflated module.

Operators should maintain the listed 2.0 PSI chamber pressure and use Vario-Lock 10 compatible connections for two-sided linear layouts. The available product details do not list a pump, anchor system, mooring lines, repair kit, or safety equipment as included.

Materials and Construction

Duratex 0.90 mm, 1000-denier reinforced PVC forms the listed commercial inflatable structure. Vario-Lock 10 straps provide the listed two-sided linear connection system. Four heavy-duty marine-grade stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing surfaces, slide areas, D-rings, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide obstacle inflates to 10 ft by 8 ft by 3 ft 7 in and weighs 66 lbs when dry. Installers should select a location with at least 6 ft of water depth, allow space for the module footprint and landing zone, plan the two-sided Vario-Lock 10 layout, and identify mooring positions before deployment.

Inflate the chamber to the listed 2.0 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing surfaces, slide areas, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing surfaces, slide areas, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Sierra carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 6 ft of depth and space for the 10 ft by 8 ft by 3 ft 7 in obstacle. Plan for no more than four concurrent users, maintain 2.0 PSI chamber pressure, use Vario-Lock 10 compatible linear connections, and account for the 66 lbs dry weight during setup.