Aquaglide Skyrocket Trapeze Commercial Water Trampoline

Description

Constructed from 1100-denier Duratex PVC with RF welded seams, theAquaglide Skyrocket Trapezecombines a floating water bouncer with a trapeze launch tower. The 16 ft 5 in by 15 ft 5 in module supports four concurrent users within a stated 800 lbs total payload. Four independent float chambers operate at 1.5 PSI.

Eighteen molded handles and integrated webbing step treads form the listed boarding layout. Six marine-grade 316 stainless steel D-rings provide mooring points. The module requires an 8 ft 2 in water-depth landing clearance and weighs 150 lbs when dry.

Key Features of the Skyrocket Trapeze

• Duratex 1100-denier PVC forms the listed floating bouncer and trapeze-tower construction.
• RF welded seams provide the listed radio-frequency structural seam technology.
• Four users can occupy the module within the listed 800 lbs total payload.
• An 8 ft 2 in water depth provides the listed drop-landing clearance.
• Four independent float chambers operate at the listed 1.5 PSI pressure.
• Eighteen molded handles and webbing treads provide the listed boarding arrangement.
• Six marine-grade 316 stainless steel D-rings provide the listed mooring points.
• EN ISO 25649 compliance and WWA Safety Directives approval are stated.
• The 150 lbs dry weight supports transport and deployment planning.

Use and Capacity

The Skyrocket Trapeze is classified as a commercial floating water bouncer and trapeze launch tower. It supports up to four concurrent users within the listed 800 lbs total payload. The required 8 ft 2 in water depth provides the listed drop-landing clearance zone beneath the inflated module.

Operators should maintain 1.5 PSI across the four independent safety float chambers. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or additional connection hardware as included.

Materials and Construction

Duratex 0.9 mm, 1100-denier PVC forms the listed inflatable hull. Radio-frequency welded seams provide the listed seam technology. Eighteen molded handles, integrated webbing treads, and six stainless steel D-rings form the listed boarding and mooring hardware.

Water, salt, sand, sunscreen residue, and debris can still collect around the PVC hull, handles, webbing treads, D-rings, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, anchoring, cleaning, and storage.

Installation and Setup

The Aquaglide bouncer and tower uses a 16 ft 5 in by 15 ft 5 in footprint and weighs 150 lbs when dry. Installers should choose a location with at least 8 ft 2 in of water depth, allow space for the full module and landing zone, and identify six mooring positions before deployment.

Inflate all four float chambers to the listed 1.5 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection hardware as included.

Care and Operating Notes

Rinse the PVC hull, handles, webbing treads, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect chambers, handles, treads, D-rings, seams, valves, and visible PVC surfaces before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Skyrocket Trapeze carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 8 ft 2 in of depth and room for the 16 ft 5 in by 15 ft 5 in module. Plan for no more than four users within the 800 lbs total payload, maintain 1.5 PSI across four float chambers, account for the 150 lbs dry weight, and arrange six mooring points.