FREE DELIVERY TODAY - Place your 1st order.
CTM CT-16H – 16,000 BTU Marine Air Conditioner 230V 50/60HZ
CTM CT-16H provides 16,000 BTU marine air conditioning with 230V 50/60HZ power for onboard climate system installations.
- 16,000 BTU capacity handles medium cabins.
- 230V input matches listed systems.
- 50/60HZ operation covers listed frequencies.
- CT-16H identifies the CTM configuration.
- Marine unit supports interior climate control.
Products are almost sold out
available only:
4In Stock
Description
A 230V salon system must balance cooling output, heating capacity, seawater flow, and available electrical power. The CTM CT-16H provides 16,000 BTU/h of cooling and 16,000 BTU/h of heating in a self-contained marine air conditioner. Its 500 CFM airflow, 1,250 W power consumption, and recommended use in main salons or large cabins suit the supplied 35 to 45-foot vessel guidance.
Key Features
- Provides 16,000 BTU/h cooling for main salons and large cabins.
- Adds 16,000 BTU/h heating for changing onboard conditions.
- Accepts 230V power across 50 or 60 hertz systems.
- Delivers 500 CFM airflow through a six-inch duct connection.
- Uses cupro-nickel condenser construction for marine heat exchange.
- Provides digital touchpad control for direct system operation.
Technical Specifications
- Model: CT-16H self-contained series
- Cooling capacity: 16,000 BTU/h
- Heating capacity: 16,000 BTU/h
- Electrical supply: 230V, 50/60 Hz, single phase
- Operating current: 5.8 A with 22 A startup current
- Power consumption: 1,250 W
- Refrigerant and compressor: R-410A with rotary compressor
- Seawater requirement: 5.0 to 7.0 GPM with 6.0 GPM pump
- Airflow and duct: 500 CFM with six-inch duct connection
- Dimensions and weight: 480 x 400 x 320 mm; 28 kg
Application and Installation Notes
The CT-16H is intended for main salons and large cabins on vessels measuring approximately 35 to 45 feet. Installation planning should confirm the 230V single-phase supply, 1,250 W power consumption, 6.0 GPM pump, five-to-seven GPM seawater range, three-quarter-inch MPT connections, six-inch ducting, digital touchpad location, and service clearance. The stated operating temperature range is 10 to 40 degrees Celsius, with an IP22 rating.
Who This Unit Is Not Ideal For
This model is not designed for 115V-only systems or small cabins that do not require 16,000 BTU/h. It may also be unsuitable where the vessel cannot provide the required seawater flow or electrical capacity. Static pressure is listed as pending and should be confirmed with CTM Marine.
Warranty and Product Summary
The CTM CT-16H includes a 2-year standard warranty and carries CE and ISO 8846 certifications according to the supplied data. Its 230V heating and cooling output, 500 CFM airflow, digital touchpad, and cupro-nickel condenser suit compatible larger marine cabins.
| Brand | CTM Marine |
| Model | CT-16H |
| Series | Self-Contained |
| Country of Origin | USA |
| System Architecture | Self-Contained |
| Cooling Capacity | 16,000 BTU/h |
| Heating Capacity | 16,000 BTU/h |
| Voltage | 230V |
| Frequency | 50/60Hz |
| Phase | 1Ph |
| Running Amperage | 5.8A |
| Startup/LRA | 22A |
| Power Consumption | 1250W |
| Refrigerant Type | R-410A |
| Compressor Type | Rotary |
| Condenser Coil Material | Cupro-Nickel |
| Evaporator Coil Material | Aluminum |
| Air Flow Rate | 500 CFM |
| Static Pressure | TBC - Contact Manufacturer |
| Dimensions - Unit | 480x400x320mm |
| Dimensions - Elec Box | 200x150x80mm |
| Net Weight | 28kg |
| Noise Level | 55 dB(A) |
| Water Pump Req | 6.0 GPM |
| Min/Max Seawater Flow | 5.0-7.0 GPM |
| Seawater Inlet/Outlet | 3/4" MPT |
| Duct Connection | 6" |
| Control Interface | Digital Touchpad |
| Operating Temp Range | 10-40°C |
| IP Rating | IP22 |
| Certifications | CE, ISO 8846 |
| Standard Warranty | 2 Years |
| Service Interval | 6 Months |
| Typical Installation | Main Salon/Large Cabin |
| Recommended Vessel Length | 35-45ft |
What's in the Box
- 1x CTM CT-16H 16,000 BTU Self-Contained Marine Air Conditioner (230V - 50/60Hz)
- 1x High-Velocity 360-Degree Rotatable Turbo Blower
- 1x Corrosion-Proof Titanium Seawater Circulating Coil
- 1x Heavy-Duty Stainless Steel Base Pan with ABS Drain Tray
- 1x Next-Generation Universal Main Control Board
- 1x Removable and Washable Mesh Air Filter
- 1x Remote Air Temperature Sensor Probe
- 1x User Manual and Installation Guide
CTM CT-16H Marine AC FAQ
How much cooling does CT-16H provide?
CTM CT-16H provides a total of 16,000 BTU cooling. This self-contained setup is configured for mid-sized boat cabins, integrating an eco-friendly R410A system to balance relative humidity and decrease interior heat indexes while operating efficiently over single-phase 230 Volt power distribution grids onboard large yachts.
What is the weight of this unit?
CTM CT-16H features a net weight of 59 lbs. The unit uses a structural stainless steel frame base and an ABS drain tray assembly to protect against marine corrosion or premature material failure without loading excessive weight down on small vessel hull stringer grids.
Where is CTM CT-16H applied onboard?
CTM CT-16H is ideal for mid-sized cabins and crew quarters. It delivers excellent environmental comfort on express cruisers or motor yachts from thirty-five to forty-five feet, fitting effortlessly underneath main salon dinettes where its high-velocity rotatable turbo blower maximizes throw without noise stress.
| Product Metric | Official Value |
|---|---|
| Voltage Circuit | 230V 50/60Hz |
| Duct Connection | 6 inches |
| Blower Style | Rotatable Turbo |
| Hose Fitting | 5/8 inch |
You must be logged in to post a review.
Reviews
There are no reviews yet.