FREE DELIVERY TODAY - Place your 1st order.
CTM CT-6HS – 6,000 BTU Marine Air Conditioner – 230V – 50/60HZ W/SOFT START
CTM CT-6HS Marine AC (Soft Start) – 6,000 BTU features a premier 230V climate control design optimized for power-sensitive luxury yachts. By integrating a Soft Start module with its 6,000 BTU reverse-cycle system, this unit eliminates electrical noise and startup spikes, providing the whisper-quiet operation and precision thermal regulation required for high-end guest cabins and localized technical zones.
- Thermal Output: 6,000 BTU/hr Cooling and Heating.
- Startup Technology: Integrated Soft Start amperage limiter.
- Power Requirements: 230V AC / 50-60Hz Single Phase.
- Vessel Integration: Best for VIP cabins on modern luxury yachts.
- Warranty Coverage: CTM Marine 2-year limited factory protection.
Products are almost sold out
available only:
3In Stock
Description
CTM Marine CT-6HS Soft Start Standard Marine Air Handler
The CTM Marine CT-6HS Soft Start Standard unit provides 6,000 BTU/h of heating and cooling power while optimizing restricted power grid capacities. Utilizing a low-profile 400x280x280mm structure, the self-contained framework drives a 250 CFM air flow rate out a 4-inch duct connection into localized cabin zones. This micro-climate setup stabilizes limited inverter power systems, delivering a superior choice compared to a high-spike 230v chilled water fan coil configuration.
Power tracking on single-phase 230V 50/60Hz generator grids is managed using integrated soft-start technology that restricts the initial startup peak while keeping running amperage at 2.6A. This 600W system combines an advanced rotary compressor and premium cupro-nickel condenser loop, dampening sound down to 48 dB(A) noise levels. Seawater circuits operate on a 3.0 GPM requirement inside an IP22-rated, ISO 8846 ignition-protected housing.
System Architecture and Key Integration Points – CTM Marine CT-6HS:
- Integrated soft start technology reducing current spikes
- Efficient 6,000 BTU marine climate control matrix
- Targeted 250 CFM continuous air flow delivery
- Standard 4-inch duct layout installation connection ring
- Low 2.6A running current draw operational profile
- Protected 600W maximum single phase electrical consumption
- Rugged cupro nickel marine water heat exchanger
- Quiet 48 decibel under berth sound dampening
- Ignition protected ISO 8846 yacht electrical standard
- Durable twenty kilogram self contained structural assembly
Condenser Architecture and Environmental Resilience
Cupro-nickel condenser coils provide maximum thermal transfer by sustaining optimal refrigerant expansion without scaling blockages. The internal loop layout is engineered to withstand extreme marine conditions while preventing peak amp surges from destabilizing small auxiliary power grids. This technical execution guarantees long-term thermodynamic stability, ensuring reliable cooling during extended off-grid anchorage cycles.
Extended Mechanical Integrity and Ownership Guarantee
A comprehensive 2-year factory warranty protects the mechanical and electronic infrastructure elements of this soft-start system. The standard warranty policy provides zero-cost part replacements for verified compressor issues, blower defects, or soft-start module failures under proper usage parameters. Vessel operators maintain complete financial protection while running off solar or small inverter networks.
Cabin Space Optimization and Spatial Requirements
Vessels measuring 20-28ft achieve perfect power-to-cooling efficiency when using this specialized soft-start climate unit. The configuration fits into small sailboat berths or cuddy cabins operating off small generators or battery banks. Eliminating high inrush currents allows smooth multi-appliances management, providing steady climate control without tripping shore-power or inverter breakers.
CTM CT-6HS Specs
| Brand | CTM Marine |
| Model | CT-6HS |
| Series | Soft Start Standard |
| System Architecture | Self-Contained |
| Cooling Capacity | 6,000 BTU/h |
| Heating Capacity | 6,000 BTU/h |
| Voltage | 230V |
| Frequency | 50/60Hz |
| Phase | 1Ph |
| Running Amperage | 2.6A |
| Startup Tech | Soft-Start Integrated |
| Power Consumption | 600W |
| Refrigerant Type | R-410A |
| Compressor Type | Rotary |
| Condenser Coil | Cupro-Nickel |
| Air Flow Rate | 250 CFM |
| Dimensions - Unit | 400x280x280mm |
| Net Weight | 20kg |
| Noise Level | 48 dB(A) |
| Water Pump Req | 3.0 GPM |
| Duct Connection | 4" |
| Control Interface | Digital Touchpad |
| IP Rating | IP22 |
| Certifications | CE, ISO 8846 |
| Warranty | 2 Years |
What's in the Box
- 1x CTM CT-6HS 6,000 BTU Self-Contained Marine Air Conditioner (230V - 50/60Hz)
- 1x Factory-Integrated Soft Start System (EasyStart)
- 1x High-Velocity 360-Degree Rotatable Turbo Blower
- 1x Corrosion-Proof Titanium Seawater Circulating Coil
- 1x Heavy-Duty Stainless Steel Base Pan with ABS Drain Tray
- 1x Next-Generation Universal Main Control Board
- 1x Removable and Washable Mesh Air Filter
- 1x Remote Air Temperature Sensor Probe
- 1x User Manual and Installation Guide
CTM CT-6HS Marine AC FAQ
How much does CTM CT-6HS weigh?
CTM CT-6HS weighs exactly 43 lbs net weight. This self-contained marine air conditioner provides 6,000 BTU of cooling and heating capacity, optimizing powerboat environment controls without structural weight constraints. It features a factory-integrated soft start system to lower starting current spikes.
What duct size does this unit need?
CTM CT-6HS requires a 4 inch duct ring size. This specific layout standard allows your high-velocity rotatable turbo blower assembly to circulate air volume without backpressure stress, optimizing localized cabin temperature reduction and securing safe, prolonged operation during tough weather conditions.
Where should you install CTM CT-6HS?
CTM CT-6HS is perfect for small cuddy cabins and sailboat V-berths. Marine technicians typically install this 230 Volt system beneath lower seating blocks or cockpit storage benches on hulls up to twenty-eight feet, where its integrated soft start system minimizes electrical load surges on inverter networks.
| Design Metric | Factual Value |
|---|---|
| Cooling Capacity | 6,000 BTU |
| Voltage Rating | 230V 50/60Hz |
| Refrigerant Charge | R410A |
| Waterline Port | 5/8 inch |
Additional information
| Brand | CTM Marine |
|---|---|
| Cooling Capacity | 6000 BTU |
| Frequency | 50/60 Hz Dual |
| System Type | Self-Contained |
| Voltage | 230V |
You must be logged in to post a review.
Reviews
There are no reviews yet.