CTM Marine EV-10H 10000 BTU Split A/C Evaporator 230V

CTM Marine EV-10H 10000 BTU Split A/C Evaporator 230V

The CTM Marine EV-10H provides 10,000 BTU split A/C evaporator capacity with 230V power for compact marine climate systems.

10,000 BTU output suits compact spaces.
230V input matches listed installations.
Evaporator manages indoor heat exchange.
Split system requires compatible equipment.
EV-10H identifies the configuration.

$637.00

Products are almost sold out

This product is about to run out

available only:

In Stock

Wholesale Price

Request for Quotation

Add to wishlist

Compare

SKU: CTM-EV-10H Category: Marine Air Conditioners Brand: CTM Marine

SKU:

CTM-EV-10H

Description

The CTM EV-10H pairs with a 10,000 BTU condenser on 230V systems, giving boats with smaller cabins a compact air handler that doesn’t demand much installation space. It’s built on the same stainless steel platform as CTM’s larger evaporators, just scaled down for lower-capacity applications.

Key Features of the CTM EV-10H Evaporator

This unit is designed to slot into tight compartments while still moving enough air for a 10,000 BTU cooling load. The features below are consistent across CTM’s 230V evaporator lineup, with dimensions and airflow scaled to match each capacity tier.

Direct drop-in replacement for the Dometic TVE evaporator
350 CFM blower airflow, matching CTM’s mid-tier evaporator sizing
Reusable air filter removes, washes, and reinstalls without replacement
Vibration isolation bases under the blower reduce noise transfer into the cabin
Stainless steel frame base resists corrosion in harsh marine environments

CTM EV-10H Technical Specifications

Specifications below reflect the 230V configuration as published on CTM’s official spec sheet. This unit’s fuse rating is notably higher than its input amperage, which is standard practice to accommodate startup current spikes on the blower motor.

Capacity: 10,000 BTU
Voltage: 208-240V
Cycle: 50-60 Hz
Refrigerant: R410A
Blower Airflow: 350 CFM
Blower Speed: 1,200 RPM
Input Rotor Amps: 0.7 A
Fuse Max: 5 A
Blower Duct Size: 5″
Dimensions (W x D x H): 16.1″ x 10.7″ x 13.4″
Net Weight: 19.84 lbs

Why Choose the CTM EV-10H

This evaporator draws a fraction of the current the matching CX-10HN condenser pulls, and it carries CTM’s standard 2-year warranty against material and workmanship defects. If you’re replacing a Dometic or Cruisair evaporator on an existing split system, dimensions match closely enough that major modification generally isn’t needed.

What to Know Before Installing

Requires a matching condenser purchased separately — this listing is the evaporator only
5″ blower duct connects to your cabin’s ductwork
If replacing a Cruisair TV10 unit, this evaporator will need pairing with an R410A-compatible condenser since TV10 systems use R22/R417A
The reusable air filter should be cleaned periodically as part of routine maintenance

Brand	CTM Marine
Full Model SKU/Code	EV-10H-230V (EV Series Air Handler)
Country of Origin	USA
AC System Type	Split-System Marine Air Handler / Evaporator Unit (Requires Remote Condenser)
Cooling Capacity	10,000 BTU/h (2.93 kW)
Heating Capacity	10,000 BTU/h (When paired with dynamic heating-capable condenser unit)
Operating Voltage / Frequency	220-240 Volts AC / 50 or 60 Hz Single Phase Platform
Full Load Amps / Running Current	Blower Fan Current Only: 0.55 Amps at 230V Input Cycle
Recommended Circuit Breaker Rating	Fused directly via master condensing unit loop terminal block
Duct Display / Air Discharge Size	4.0" (102mm) High-Velocity Multi-Directional Blower Collar
Control Interface Connectivity	RJ12 Data Cable Terminal (Tethers directly to master CX series network controller card)
Dimensions (L x W x H)	33.5 cm x 26.5 cm x 26.5 cm / 13.2" x 10.4" x 10.4"
Dry Weight	6.1 kg / 13.5 lbs (Built on rot-proof ABS condensation base pan with high-performance copper/aluminum coil)
Application	In-room air delivery for mid-size staterooms, guest berths, and small crew spaces, mounted directly inside cabinetry quarters to eliminate engine room noise transfer (24-36 ft boat lengths)