FREE DELIVERY TODAY - Place your 1st order.
Webasto EHM600W – BlueCool Serie A – Electric Heat Module 600W – 230V
Webasto EHM600W BlueCool Heat Module utilizes a compact high-performance architecture optimized for localized heating in small staterooms or heads. This 600W module provides an efficient 4-cycle thermal response, ensuring that smaller cabins remain dry and comfortable by supplementing the primary HVAC system with targeted electric resistance heat during cold-water excursions.
- Thermal Output: 600W (approx. 2,050 BTU) Electric Heating.
- Safety Design: Dual-stage thermal safety cut-out system.
- Power Requirements: 230V AC / 50-60Hz Single Phase.
- Vessel Integration: Ideal for A4 and A6 series compact handlers.
- Warranty Coverage: Webasto 2-year limited global warranty.
Products are almost sold out
available only:
3In Stock
Description
Webasto BlueCool EHM600W Heat Module
The Webasto BlueCool A-Series EHM 600W deploys a space-saving micro-cabin framework engineered to supply a reliable 2,050 BTU/h auxiliary resistance electric heating solution directly to spaces up to 250 cu.ft. The heavy-duty inline structural chassis installs remotely within narrow blower paths, pumping conditioned air smoothly through a companion air handler output discharge duct to prevent localized climate drop-offs. This modern configuration delivers constant resistance heat staging independent of raw water temperature, providing the ultimate choice to function as a reliable corrosion resistant boat AC helper accessory layout.
Operational safety on a single-phase 230V 50/60Hz electrical infrastructure is secured by an integrated low-draw resistance wire pulling an ultra-efficient 2.6A heating element loop consumption draw. The 2.6 lbs compact assembly utilizes a high-grade corrosion resistant stainless steel housing paired with premium auxiliary electrical grids, holding mechanical machinery vibration sound emissions down to a whisper-quiet minimum. External hardware links directly inline on companion output discharge ducts, finishing a build matching an elite, NMEA 2000 marine HVAC compatible centralized distribution network layer.
Technical Capabilities and Attributes:
- Inline auxiliary heat staging module fits matching cabin blowers
- Powerful 2,050 BTU electric resistance heating capacity system matrix
- Advanced corrosion resistant stainless steel housing eliminates bilge rust
- Passive modular heating block maximizes local small cabin performance
- Extremely low 2.6A running amperage minimizes auxiliary load
- Internal configuration parameters ensure quiet under berth cabin operation
- Mounts inline directly on companion air handler discharge ducts
- Dual frequency electrical tracking handles global yacht power grids
- Rigid one point two kilogram structural frame simplifies mounting layouts
- Passive auxiliary element assembly protects vessel power lines safely
Alloy Thermodynamics and Dissipation
High-grade stainless steel housings provide maximum thermal transfer across all restricted machinery partitions by optimizing internal airflow distribution fields. The system loop interfaces directly with external staging modules, guaranteeing stable technical operations as a core element of a centralized distribution network. This advanced thermodynamic matrix provides constant performance, maintaining optimal raw water flow over years of service.
Comprehensive Manufacturer Coverage
A comprehensive 2-year factory warranty protects all structural plant parts, mechanical core modules, and electronic staging components against defects under standard marine operating protocols. This coverage delivers direct system remediation through authorized dealer channels, ensuring original engineering tolerances are maintained without out-of-pocket material expenses. Vessel owners enjoy peace of mind knowing mechanical and electronic infrastructure elements are fully secured.
Vessel Layout Fit
Vessels requiring a compact inline heating supplement achieve ideal climate stability using this premium electric resistance heating module. The physical layout is custom-tailored for installation inside small crew heads or micro cabin configurations where icy seawater reduces reverse-cycle performance loops. Seamless hardware optimization balances continuous moisture extraction across your dedicated water loops, allowing operators to maximize layout space while reducing internal equipment strain requiring a 5A minimal circuit breaker overhead.
Webasto EHM600W Specs
| Brand | Webasto |
| Exact Model Code / SKU | BlueCool A-Series EHM 600W |
| Country of Origin | Germany |
| System Architecture | Marine Air Handler Auxiliary Electric Heating Module |
| Heating Capacity - BTU/h | 2,050 BTU/h (Electrical resistance output profile) |
| Reverse Cycle Heating Function | No (Direct auxiliary resistance hardware element) |
| Electrical Voltage | 230V |
| Alternating Current Frequency | 50/60 Hz |
| Electrical Phase | Single Phase |
| Full Load Amps - FLA Heating | 2.6 A (Dedicated heater element loop consumption) |
| Max Circuit Breaker Size | 5 A (Or integrated with companion air handler distribution feed) |
| Evaporator Airflow Capacity | Sized for seamless integration with 4,000 - 6,000 BTU air handlers |
| Duct Discharge Connection Diameter | Mounts inline on companion air handler output discharge ducts |
| Net Weight | 2.6 lbs (1.2 kg) |
| Chassis & Condenser Material | High-Grade Corrosion Resistant Stainless Steel Housing |
| Standard Factory Warranty | 2 Years |
| Application & Sizing Guidance | Inline auxiliary heat staging module for micro cabin configurations or small crew heads where icy seawater reduces reverse-cycle efficiency. |
What's in the Box
- 1x Webasto BlueCool Serie A EHM600W 600W Electric Heat Module (230V)
- 1x Integrated High-Safety Overheating Thermal Protection Switch
- 1x Heavy-Duty Insulated Electric Heating Element Core
- 1x Direct Plug-and-Play Wiring Connection Harness
- 1x Rigid Inline Air Ducting Adapter Fitting
- 1x Installation Accessory Mounting Kit
- 1x User Manual and Technical Installation Guide
Webasto EHM600W Module FAQ
What voltage rating does EHM600W use?
Webasto BlueCool EHM600W utilizes a standard 230V power input. This electrical configuration is engineered for international power grids and specialized yacht electrical distributions, ensuring that inline heating loops can achieve uniform temperature restoration without loading lower-voltage ship service lines unevenly.
What are the physical dimensions of this unit?
Webasto BlueCool EHM600W features a compact inline footprint. These tight boundaries provide boat builders with substantial placement flexibility, authorizing simple mounting inside existing air duct pathways without stealing precious vertical clearances or encroaching on tight companionway layouts behind primary cabin cabinetry.
When is the Webasto EHM600W best applied?
Webasto BlueCool EHM600W is best applied as a supplemental booster heater for multi-cabin luxury cruisers. The system comfortably splits its 600W heating load directly within the airflow stream, bypassing secondary water plumbing loops to maintain custom interior warmth during cold-weather early morning late autumn angling.
| Chassis Metric | Factual Value |
|---|---|
| Output Rating | 600 Watts |
| Net Weight | 4.5 lbs |
| Safety Switch | Overheating Protection |
| Core Material | Insulated Element |
Additional information
| Brand | Webasto |
|---|---|
| Cooling Capacity | 0 BTU |
| Frequency | 50/60 Hz Dual |
| System Type | Heating Module / Accessories |
| Voltage | 230V |
You must be logged in to post a review.
Reviews
There are no reviews yet.