FREE DELIVERY TODAY - Place your 1st order.
Webasto V50 M V-Series Variable Speed Marine Chiller
Webasto V50 M identifies a V-Series variable-speed marine chiller for adjustable cooling output across compatible vessel climate systems.
- Variable speed adjusts cooling output.
- V-Series identifies the chiller platform.
- Marine chiller supports centralized cooling.
- V50 M identifies the configuration.
- Compatible distribution remains necessary.
Products are almost sold out
available only:
3In Stock
Description
Boats with three or more independent cabins wanting variable speed comfort without the largest V-Series footprint find their match in the Webasto V50, delivering 8,500 to 50,000 BTU/h from brushless DC compressors controlled continuously by inverter technology. This is the smallest capacity option in Webasto’s variable speed V-Series lineup, positioned below the V64 and V77 models.
The real benefit of variable speed control at this capacity is comfort consistency — instead of the harsh on/off cycling of a fixed-speed chiller, the compressor ramps smoothly to match the exact cooling load, which means steadier cabin temperatures and none of the startup noise or electrical surge that comes with conventional compressors kicking on.
Key Features of the Webasto V50 Chiller
This variable speed chiller three cabins unit brings Webasto’s inverter-driven compressor technology to the smallest capacity tier in the V-Series range, without sacrificing the smooth, quiet operation the series is known for.
- Variable speed brushless DC twin rotary compressors controlled continuously by inverter technology, not just at startup
- Ultra-low 2.5 amp starting current for smooth, silent operation with no startup peaks
- Adjustable amperage draw lets you limit power demand in locations with limited average amperage
- BlueCool Expert Tool enables on-site and remote diagnostics via a single USB cable
- Compatible with the Webasto MyTouch color touchscreen control display
Webasto V50 Technical Specifications
These figures come from Webasto’s official spec sheet for this listing. Worth noting: the product reference on this page lists part number WBCL1203001C, but the specification table itself is headed WBCL1203001B — an older part number — which is worth confirming with Webasto or CTM if the exact revision matters for your order.
- Cooling Capacity: 8,500 to 50,000 BTU/h
- Heating via Reverse Cycle: Integrated, yes
- Voltage: 230V
- Frequency: 50/60 Hz
- Current Draw Running: 2.5 to 15 A
- Current Draw Start: 2.5 A
- Refrigerant Charge (R410A): 892g
- Chilled Water Connection: 1″ (25mm)
- Seawater Connection: 1″ M BST (25mm)
- Dimensions (W x L x H): 20.8″ x 23.9″ x 20.1″
- Net Weight: 137 lbs
Why Choose the Webasto V50
This unit carries Webasto’s standard 2-year warranty, and the near-zero 2.5A starting current makes it a strong fit for boats on limited generator or shore power capacity. Given the part number discrepancy noted above between the page reference and the spec table heading, confirming the exact revision with Webasto or CTM before ordering is a reasonable precaution.
What to Know Before Installing
- This chiller requires separately specified air handlers (Webasto’s A-Series) distributed to each independent zone
- Compatible with the Webasto MyTouch control display, sold separately
- Ships via freight given the 137 lb weight; commercial delivery address required
- Professional installation and electrical planning is strongly recommended
| Brand | Webasto Marine |
| Full Model SKU/Code | BlueCool V50 M (V-Series Variable Speed) |
| Country of Origin | Germany |
| AC System Type | Central Inverter Variable Speed Chilled Water Marine AC System |
| Cooling Capacity | Up to 50,000 BTU/h (Dynamically scales down to 8,500 BTU/h based on load requirements) |
| Heating Capacity | Up to 50,000 BTU/h (Reverse Cycle Heat Pump Mode with Variable Modulation) |
| Refrigerant Type | R-410A Pre-Charged Eco-Friendly Gas |
| Compressor Technology | Brushless DC (BLDC) Inverter Scroll Compressor Engine |
| Operating Voltage / Frequency | 230 Volts AC / 50 or 60 Hz Single Phase Platform |
| Full Load Amps / Running Current | Variable Range: 1.5 Amps to 13.5 Amps Maximum Continuous Load Draw |
| Locked Rotor Amps / Starting Current | 0.0 Amps LRA (Soft-Start Brushless Inverter technology eliminates startup current inrush) |
| Recommended Circuit Breaker Rating | 20 Amps Heavy-Duty Marine Breaker |
| Required Sea Water Flow Rate | 600 GPH / 37.8 Liters per minute minimum condenser loop |
| Sea Water Inlet/Outlet Size | 3/4" (19mm) Inner Diameter Hose Barb Connections |
| Chilled Water Loop Connections | 1.0" (25.4mm) Quick-Connect Threaded Internal Interface Ports |
| Condenser Coil Material | Corrosion-Resistant Cupronickel (CuNi 90/10) Coaxial Heat Exchanger Network |
| Control Interface Connectivity | BlueCool MyTouch Controller, Integrated Modbus, and Native NMEA 2000 Gateway |
| Dimensions (L x W x H) | 53.5 cm x 37.0 cm x 47.0 cm / 21.1" x 14.6" x 18.5" |
| Dry Weight | 52.0 kg / 114.6 lbs (Compact lightweight structural vibration-dampened composite pan) |
| Standard Warranty | 2 Years Factory Limited Component Protection |
| Application | Flagship climate control for modern luxury motor yachts, offshore center consoles running off lithium battery banks, and cruising catamarans seeking maximal electrical efficiency (38-65 ft boat lengths) |
You must be logged in to post a review.
Reviews
There are no reviews yet.