FREE DELIVERY TODAY - Place your 1st order.

Until the end of the sale:
00
days
00
hours
00
minutes
00
sec.

Furuno GC001 Gesture Controller f/NavPilot 300

Point-and-shoot Bluetooth gesture control defines this Furuno GC001 autopilot controller, enabling 1-degree course adjustments and Sabiki mode fishing patterns across NavPilot 300 processors down to -15°C inside an IP67 waterproof casing.

  • Bluetooth Low Energy provides wireless helm command
  • Sabiki mode maintains vessel position while jigging
  • Internal gyros recognize hand gesture directional inputs
  • IP67 waterproof casing survives open-cockpit immersion
  • Runs on two standard AA batteries
$482.00

Products are almost sold out

This product is about to run out

available only:

8

In Stock

Wholesale Price
Request for Quotation
Add to wishlist
Compare
SKU: FUR-GC001-REM Category: Brand:
SKU:

FUR-GC001-REM

Description

Use gesture-based steering input with a compatible NavPilot 300 system through the Furuno GC001 Gesture Controller. This handheld controller connects by Bluetooth Low Energy to the autopilot processor and uses two AA batteries for a 3V DC supply. An internal gyro and accelerometer support the stated gesture-control method, while the segment LCD provides the specified display interface. The GC001 measures 145 mm high, 48 mm wide, and 33 mm deep.

Its IP67 rating and operating range of minus 15°C to 55°C define the stated environmental specifications. The unit works as a remote control for NavPilot 300, rather than as an independent autopilot, heading sensor, or drive unit. Pairing occurs with the compatible processor, and the supplied package includes the GC-001 remote, lanyard, and manual. System operation remains dependent on the installed NavPilot 300 components.

Key Specifications of the Furuno GC001 Gesture Controller

  • The handheld controller provides Bluetooth Low Energy gesture steering input for a compatible Furuno NavPilot 300 autopilot system.
  • An internal gyro and accelerometer support the stated gesture-control method, while a segment LCD provides the documented display interface.
  • Two AA batteries provide the 3V DC operating supply, separating remote power requirements from the fixed autopilot installation.
  • The controller measures 145 mm high, 48 mm wide, and 33 mm deep for handheld or lanyard-based carrying.
  • IP67 protection and a minus 15°C to 55°C operating range define the stated environmental parameters for this remote unit.
  • Bluetooth pairing connects the remote controller to a compatible NavPilot 300 processor for the documented wireless-control arrangement.
  • The package includes the GC-001 remote, lanyard, and manual, providing the documented components for the supplied controller kit.

Remote Control and Integration

This Furuno remote works with a NavPilot 300 autopilot system and does not replace its processor, heading source, steering drive, or installed control display. Bluetooth Low Energy provides the stated wireless connection to the processor. The internal gyro and accelerometer support gesture input, while the exact available steering functions depend on the configured NavPilot 300 system.

Furuno lists one-degree increments and Sabiki Mode control among the supplied features. Check that the target NavPilot 300 system supports the required function before ordering. The controller is handheld or lanyard carried, so buyers should account for its 145 mm by 48 mm by 33 mm size, two-AA battery requirement, pairing process, and IP67 environmental rating.

Why Choose the Furuno GC001 Gesture Controller

The Furuno GC001 Gesture Controller adds Bluetooth Low Energy remote input to a compatible NavPilot 300 system. Buyers can compare its internal gyro and accelerometer, segment LCD, two-AA battery supply, handheld and lanyard format, 145 mm by 48 mm by 33 mm dimensions, IP67 rating, one-degree adjustments, and NavPilot 300 pairing requirement with other autopilot remote-control options.

Setup and Network Considerations

Confirm that the vessel already has a compatible Furuno NavPilot 300 processor before selecting this remote. Install two AA batteries, pair the controller according to Furuno documentation, and confirm the intended steering modes are configured on the existing autopilot. Review the handheld location, lanyard use, Bluetooth pairing requirement, and access to the installed NavPilot system before relying on the controller for remote input.

Warranty and Support

Furuno warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for the GC001. Mulmarine.com can help you review NavPilot 300 compatibility, Bluetooth pairing, battery requirements, controller dimensions, included remote and lanyard, and required system components before purchase. Review the applicable Furuno warranty coverage and documented package contents before ordering.

Before Ordering the Furuno GC001 Gesture Controller

Confirm that you have a compatible Furuno NavPilot 300 autopilot system and need a handheld Bluetooth control rather than a complete autopilot package. You should verify the two-AA battery requirement, Bluetooth pairing process, available NavPilot 300 steering modes, IP67 environmental rating, 145 mm by 48 mm by 33 mm dimensions, and the documented remote, lanyard, and manual package contents before purchase.

Furuno GC001 Gesture Controller f/NavPilot 300

Display TypeLCD Segment Display
Control UnitNavPilot 300 Compatible
Drive Unit CompatibilitySystem Dependent
Max Boat DisplacementN/A (Remote Control)
Steering TypeBluetooth Gesture Steering
Heading SensorInternal Gyro/Accelerometer
Operating Voltage3V DC (2x AA Batteries)
Power Consumption (Idle)Ultra-low Power Mode
Power Consumption (Typical)Standard Battery Use
Networking (NMEA 2000/0183)Bluetooth to Processor
Wireless CapabilitiesBluetooth Low Energy (BLE)
Integration (MFD Support)NavPilot 300 Integration
Sea State OptimizationGesture Sensitivity Adjustment
Course Accuracy1-degree Increments
Rudder Reference SupportN/A
Commissioning MethodWireless Pairing
Waterproof RatingIP67
Operating Temperature-15°C to +55°C
Mounting OptionsHandheld / Lanyard
Dimensions (Control Head)145 (H) x 48 (W) x 33 (D) mm
In-box ContentsGC-001 Remote, Lanyard, Manual
Key FeaturesPoint-and-shoot steering, Sabiki™ Mode control

Reviews

There are no reviews yet.

Be the first to review “Furuno GC001 Gesture Controller f/NavPilot 300”

You may also like…

Shopping Cart

No products in the cart.

Free Shipping on All Orders Over $1,000

Log in

You dont have an account yet? Register Now

Type the product you want to search for and press enter.