FREE DELIVERY TODAY - Place your 1st order.
Garmin Reactor 40 Hydraulic Autopilot Corepack Only
Custom powerboat and sailboat retrofits integrate existing hydraulic drive lines through the Garmin Reactor 40 hydraulic autopilot, delivering 40A peak current to 1.0L, 2.0L, or SmartPump V2 units across 12V or 24V networks.
- Solid-state 9-axis AHRS maintains 1-degree accuracy
- Drives 1.0L, 2.0L, and SmartPump V2 arrays
- Adaptive 12V/24V circuitry matches vessel power
- Shadow Drive allows manual helm takeover
- NMEA 2000 backbone links marine chartplotters
Products are almost sold out
available only:
5In Stock
Description
The Garmin Reactor 40 Hydraulic Autopilot Corepack Only, SKU 010-02794-00, provides the core electronics for a custom hydraulic autopilot installation. It includes the Reactor 40 CCU and ECU architecture but requires a separate compatible display, hydraulic pump, fittings, hoses, and vessel-specific installation components. It is intended for powerboats and sailboats with compatible hydraulic steering systems.
The corepack supports 12V or 24V DC power, NMEA 2000 networking, and a solid-state nine-axis AHRS. It can be paired with compatible 1.0 L, 2.0 L, or SmartPump V2 drive options, with up to 40A peak output capacity. Correct pump selection depends on hydraulic-cylinder volume, system pressure, cylinder count, vessel use, and the steering manufacturer’s requirements.
Key Specifications
- SKU 010-02794-00 is an electronics-only hydraulic autopilot corepack.
- Requires a separate compatible display, hydraulic pump, fittings, hydraulic hoses, and installation hardware.
- Supports compatible hydraulic steering systems on powerboats and sailboats.
- Operates on 12V or 24V DC systems with NMEA 2000 backbone integration.
- Uses a solid-state nine-axis AHRS for heading and attitude sensing.
- Supports compatible 1.0 L, 2.0 L, and SmartPump V2 drive configurations.
- Provides up to 40A peak ECU output for the selected hydraulic drive.
- The CCU is IPX7-rated, while the ECU housing is rated IPX4 and requires protected installation.
Hydraulic System Matching
Measure the steering-cylinder volume before selecting a pump. The selected pump must match the cylinder volume, hydraulic pressure rating, total steering cylinders, helm-pump arrangement, and hydraulic hose specification. A proper installation may also require adapters, T-fittings, isolation valves, and hose rated for the system’s operating pressure.
The corepack does not include a control display. Use a compatible Garmin GHC autopilot display or Garmin chartplotter for configuration and operation. Install the CCU clear of magnetic interference and mount the ECU in a protected, accessible area with suitable ventilation and wiring access.
Before Ordering
Confirm the hydraulic-cylinder volume, system pressure, required pump size, fitting standard, hose routing, compatible Garmin display, NMEA 2000 network, 12V or 24V supply, 40A peak circuit capacity, CCU location, ECU mounting space, and all required hydraulic installation parts before purchase.
Garmin Reactor 40 Hydraulic Autopilot Corepack Only
| Brand | Garmin |
|---|---|
| Full Model SKU/Code | 010-02794-00 (Reactor 40 Corepack) |
| Country of Origin | Taiwan |
| Component Type | Autopilot Electronics Corepack Only (Requires Display, Pump, and Fittings) |
| Vessel Hull Type Compatibility | Powerboats and Sailboats (Hull Type Profile Configured via CCU Software) |
| Steering System Type Compatibility | Hydraulic Steering Configurations |
| Operating Voltage | 12 Volts DC / 24 Volts DC Adaptive Circuitry Layer |
| Data Networking Protocols | NMEA 2000 Interface Backbone Connection |
| Heading Sensor / Compass Technology | Solid-State 9-Axis Attitude Heading Reference System (AHRS) |
| Heading Accuracy | +/- 1° Static / Dynamic Compass Deviation |
| Drive Unit Compatibility / Output Current | Compatible with 1.0L, 2.0L, and SmartPump V2 Drive Arrays / Max 40 Amps Peak Output |
| Waterproof Rating | IPX7 Core Sensor Enclosure Case / IPX4 ECU Controller Frame Housing |
| Maximum Current Draw | ECU Driven Delivery Limit: Max 40 Amps Peak Load Current Draw |
| Calibration Method | Instrument-Driven Autopilot Configuration Wizard and Auto-Tune Algorithms |
| Smart Technology Features | Shadow Drive Overlay Capability, Wind Hold Tracking, Direct Chartplotter System Integration |
| Dry Weight | 1.4 kg / 3.1 lbs (CCU and ECU Assembly Combined) |
| Application | Custom commercial or leisure vessel retrofits needing standalone core electronics to link with existing hydraulic drive lines (20-50+ ft boat lengths) |
You must be logged in to post a review.
Reviews
There are no reviews yet.