Simrad AP44 Autopilot Controller Instrument Display

Description

Set up a dedicated autopilot control station with the Simrad AP44 Autopilot Controller, a 4.1-inch optically bonded color TFT display with a rotary dial for heading adjustment. The controller connects to a 12V NMEA 2000 Micro-C backbone and functions as a control head, so a compatible autopilot processor and drive unit remain required. Its 118 x 115 x 48.5 mm flush-mount format should be checked against available helm-panel depth.

The AP44 display has a 320 x 240 resolution, 600-nit brightness, and an IPX7 front-facing waterproof rating. At 0.32 kg, or 0.7 lb, it draws up to 0.1A at 12V DC with a LEN value of 2. Continuum Steering Technology, NoDrift mode, rotary heading adjustment, setup wizards, and network diagnostics are system functions available through a compatible Simrad autopilot installation.

Key Specifications of the Simrad AP44 Autopilot Controller

• The AP44 provides a 4.1-inch optically bonded color TFT display with 320 x 240 resolution for dedicated autopilot control.
• A rotary dial supports heading adjustment, while the display provides access to compatible steering modes and setup functions.
• Flush mounting requires a 118 x 115 x 48.5 mm installation space, including rear clearance for the NMEA 2000 connection.
• The controller runs on a 12V NMEA 2000 backbone and draws up to 0.1A with a stated LEN value of 2.
• Optically bonded protective glass and 600-nit brightness define the documented display construction and illumination specification for the AP44.
• An IPX7 front-facing rating supports the stated environmental classification for the controller at a compatible helm position.
• Continuum Steering Technology and NoDrift mode operate through the connected Simrad autopilot processor and compatible drive components.

System Integration and Control

This Simrad AP44 is a control head only. It does not include an autopilot processor, steering drive, heading sensor, or separate display network. A compatible Simrad autopilot system and NMEA 2000 backbone must already be planned for the controller to perform autopilot functions.

Supported steering modes can include heading, NoDrift, navigation, wind, and follow-up steering functions when the connected system is configured for them. The controller works with compatible powerboat and sailboat autopilot installations, but hull profile, drive capacity, sensor selection, and commissioning requirements are handled through the associated computer and system components.

Why Choose the Simrad AP44 Autopilot Controller

The Simrad AP44 Autopilot Controller adds a 4.1-inch color display and rotary heading control to a compatible autopilot system. Its 320 x 240 resolution, 600-nit display, optically bonded screen, 118 x 115 x 48.5 mm flush-mount size, 12V NMEA 2000 supply, 0.1A draw, LEN 2 load, IPX7 rating, and control-mode access help buyers assess integration requirements before adding a helm controller.

Setup and Network Considerations

Confirm that your vessel already has, or will include, a compatible Simrad autopilot processor, drive, heading sensor, and NMEA 2000 backbone. Plan the 118 x 115 x 48.5 mm flush-mount position, display visibility, network-drop connection, 12V backbone supply, and cable clearance before installation. Use Simrad setup and calibration tools only after the complete autopilot steering system has been installed and configured.

Warranty and Support

Simrad warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for the AP44 controller. Mulmarine.com can help you review NMEA 2000 network requirements, flush-mount space, processor and drive compatibility, display power draw, and helm-control requirements before purchase. Review the applicable Simrad warranty coverage and documented package contents before ordering.

Before Ordering the Simrad AP44 Autopilot Controller

Confirm that you need an autopilot control head and already have, or plan to install, a compatible processor, drive unit, heading sensor, and NMEA 2000 backbone. You should verify the 118 x 115 x 48.5 mm flush-mount space, 12V network supply, LEN 2 capacity, display location, cable routing, and supported autopilot functions before purchase.