Simrad AP70 MK2 AC70 Course Computer Autopilot Pack

Description

Build a commercial autopilot system around the Simrad AP70 MK2 AC70 Course Computer Autopilot Pack, which combines a five-inch high-visibility transflective color TFT control display with an AC70 course computer. The system supports 12V or 24V DC power and accepts heading data from compatible NMEA AHRS, GPS compass, or gyrocompass sources. Its dual NMEA 0183 ports, NMEA 2000 and SimNet compatibility, and IEC 61162-1 and IEC 61162-2 support establish key networking considerations.

The AC70 provides 30A continuous output with up to 50A peak output, while maximum system controller draw is stated at 40A under heavy load. The combined display and junction-pack dry weight is 4.8 kg, or 10.6 lb. It supports hydraulic, mechanical, solenoid-valve, and jet-drive steering configurations, but the selected drive, steering gear, heading sensor, and vessel installation must be evaluated as one complete autopilot system.

Key Specifications of the Simrad AP70 MK2 AC70 Course Computer Autopilot Pack

• The commercial autopilot pack combines an AP70 MK2 five-inch transflective color display with an AC70 course computer for system control.
• Hydraulic, mechanical, solenoid-valve, and jet-drive steering systems can connect when paired with compatible drives and vessel steering components.
• The AC70 delivers 30A continuous output and up to 50A peak output for compatible autopilot drive-control requirements.
• Operating voltage supports 12V or 24V DC systems, while maximum controller draw reaches 40A under specified heavy-load conditions.
• NMEA 2000, SimNet, dual NMEA 0183, and IEC 61162-1 or IEC 61162-2 interfaces support documented network integration paths.
• Compatible NMEA AHRS, GPS compass, and gyrocompass sources supply heading data, with course accuracy dependent on the selected input sensor.
• The display and junction pack weigh 4.8 kg, requiring suitable mounting support and cable planning within the vessel installation.

System Integration and Control

This Simrad commercial autopilot pack requires a separate compatible steering drive and heading source. The AP70 MK2 display provides the control interface, while the AC70 course computer supplies drive-control output. Its heading performance depends on the connected NMEA AHRS, GPS compass, or gyrocompass rather than the display or course computer alone.

The system supports NoDrift turn patterns, work-mode profiles, and thruster-control integration as specified functions. Dockside tuning and sea-trial calibration profiles are part of the stated commissioning approach. Confirm the intended steering type, drive-current requirements, heading-source interface, NMEA network, display mounting location, and total electrical load before system installation.

Why Choose the Simrad AP70 MK2 AC70 Course Computer Autopilot Pack

The Simrad AP70 MK2 AC70 Course Computer Autopilot Pack combines a five-inch transflective display with 30A continuous and 50A peak drive output. Buyers can compare its 12V or 24V supply, multi-input heading support, NMEA 2000, SimNet, NMEA 0183, and IEC interfaces, hydraulic and mechanical steering compatibility, work-mode profiles, thruster integration, and 4.8 kg combined weight with other commercial autopilot components.

Setup and Network Considerations

Confirm the compatible steering drive, heading source, and steering-system interface before ordering this pack. Check that the selected drive current remains within the AC70 output range and plan 12V or 24V supply capacity for the system’s stated maximum load. Route NMEA 2000, SimNet, NMEA 0183, and display cables according to the intended network architecture, then follow Simrad dockside-tuning and sea-trial commissioning documentation.

Warranty and Support

Simrad warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for this autopilot pack. Mulmarine.com can help you review AC70 drive-current capacity, steering type, heading-source selection, display mounting, NMEA network interfaces, 12V or 24V power requirements, and commissioning considerations before purchase. Review the applicable Simrad warranty coverage and documented package contents before ordering.

Before Ordering the Simrad AP70 MK2 AC70 Course Computer Autopilot Pack

Confirm that your vessel has a compatible drive, steering system, heading sensor, and installation plan for a commercial autopilot system. You should verify the AC70 30A continuous and 50A peak output limits, 12V or 24V supply, 40A maximum controller draw, AP70 MK2 display mounting, NMEA 2000 or SimNet architecture, NMEA 0183 needs, and required dockside and sea-trial commissioning.