VTE Paguro 14000 – 14kW Marine Generator 3600 RPM

Description

The VTE Paguro 14000 is a high-speed marine diesel generator for 60Hz AC systems. In its 60Hz configuration, the Paguro 14000 uses a Lombardini LDW 1003 three-cylinder diesel engine operating at 3,600 RPM and can deliver up to 14 kW continuous output. Generator voltage and phase vary with the ordered alternator configuration, so confirm whether the vessel requires 120V single-phase, 240V single-phase, 480V three-phase, or another available configuration.

The generator uses a water-cooled synchronous alternator, freshwater heat-exchanger cooling, and a self-priming raw-water pump. It is supplied in a soundproof fiberglass capsule with a remote LCD control system that provides operating data, load indication, automatic start, and low-oil-pressure plus over-temperature protection. Proper marine installation and output configuration verification are essential before purchase.

Key Specifications

• High-speed marine diesel generator for 60Hz AC electrical systems.
• Provides up to 14 kW continuous output at 3,600 RPM in the documented 60Hz configuration.
• Uses a Lombardini LDW 1003 three-cylinder diesel engine with 1,028 cc displacement.
• Uses a synchronous alternator with compound regulation and water cooling.
• Uses freshwater cooling through a heat exchanger and self-priming raw-water circulation.
• Specific fuel consumption is listed at approximately 0.35 L per kW per hour.
• Measures approximately 860 mm by 580 mm by 650 mm and weighs approximately 210 kg with the soundproof capsule.
• Includes 12V electric start, 8A battery charger, remote LCD controls, automatic start, and low-oil-pressure plus over-temperature shutdown.

Electrical Compatibility

Confirm the exact ordered voltage and phase configuration before purchase. The Paguro 14000 family is available in different 50Hz and 60Hz configurations, and output voltage, alternator design, engine speed, phase, kVA rating, and electrical current can differ between versions. Do not combine data from the 50Hz and 60Hz models.

Generator selection should account for continuous load, simultaneous demand, power factor, and motor-starting surge. Include HVAC, refrigeration, pumps, battery chargers, watermakers, galley appliances, and other high-demand onboard equipment in the load calculation.

Installation Considerations

Install the generator on a rigid vibration-isolated foundation sized for approximately 210 kg, with access for oil, filters, coolant, raw-water components, electrical terminals, exhaust, and capsule service. Provide diesel fuel supply and return, seawater intake, strainer, wet exhaust, ventilation, start battery, AC distribution, grounding, circuit protection, and a shore-power transfer switch or interlock. Installation and commissioning should be completed by a qualified marine generator technician.

Before Ordering

Confirm required continuous and surge load within the selected 14 kW configuration, exact voltage, phase, and 60Hz frequency requirement, available 860 mm by 580 mm by 650 mm installation space, structural support for approximately 210 kg, diesel fuel-system layout, raw-water intake, exhaust route, ventilation capacity, starting-battery circuit, remote-panel cable route, AC distribution and transfer-switch design, grounding plan, service access, and qualified marine-generator installation requirements before purchase.