Iris IRIS595 NightRunner PTZ Camera Joystick Controller

Description

Control a compatible NightRunner PTZ camera from a dedicated helm interface with the Iris IRIS595 NightRunner Joystick Controller. Its three-axis joystick, backlit keys, and preset controls give operators direct command of pan, tilt, zoom, focus, and saved camera positions without relying solely on touchscreen controls. Need repeatable camera views for docking, boarding, perimeter monitoring, or nighttime observation? The IRIS-595-JCU uses a wired RS485 connection and Pelco-D/Pelco-P control protocols for compatible PTZ camera systems.

Key Specifications

• Iris Innovations IRIS595 NightRunner PTZ Camera Joystick Controller, model IRIS-595-JCU.
• Dedicated PTZ control unit for compatible Iris NightRunner camera installations.
• Three-axis joystick for pan, tilt, and zoom control.
• Backlit rubber keypad with function-indicator LEDs.
• Supports camera focus control and preset-position recall on compatible cameras.
• RS485 serial connection with Pelco-D and Pelco-P protocol support.
• No wireless connectivity.
• 12V/24V DC input with up to approximately 3W power consumption.
• IPX6 weather protection for marine helm-panel use.
• Operating range of -13°F to 131°F (-25°C to 55°C).
• Approximate dimensions: 5.5 × 3.7 × 3.3 inches; approximate weight: 1.1 lb (0.5 kg).

Integration

The IRIS595 is a controller, not a camera, display, recorder, radar, chartplotter, or video interface. It requires a compatible NightRunner PTZ camera and RS485 serial connection configured for the correct Pelco-D or Pelco-P protocol. A compatible MFD, monitor, or NVR is still required to view camera video.

Available functions depend on the connected camera’s capabilities and protocol settings. Confirm camera compatibility, address settings, baud rate, RS485 wiring polarity, preset support, and power requirements before installation.

Installation Notes

Install the controller at a protected helm location where the joystick is easy to operate without interfering with steering, throttles, or other vessel controls. Use the required flush-mount cutout or surface bracket, and route RS485 and power wiring through protected paths away from heat, water, sharp edges, moving components, and high-current wiring.

Use proper circuit protection, sealed cable entries, and marine-grade hardware. A qualified installer should configure the camera address, protocol, joystick functions, presets, and end-to-end camera-control response before regular use.

Before Ordering

Confirm NightRunner camera compatibility, RS485 and Pelco-D/Pelco-P requirements, desired PTZ and preset functions, 12V/24V supply, helm mounting space, cable length, and whether a separate MFD, monitor, or recorder is required for camera video before ordering.