FLIR MD-625 Static Thermal Night Vision Camera w/Joystick Control Unit

Description

Add straightforward fixed thermal viewing with tactile control to a compatible marine display setup using the FLIR MD-625 with Joystick Control Unit bundle. The package pairs a 640-class fixed thermal camera with a JCU controller, giving operators quick access to available camera functions without adding the size or sweep clearance of a pan-and-tilt turret. Need a dedicated thermal view for a bow, stern, dockside area, or repeated route? The MD-625 uses a 25° field of view, 2× digital zoom, and analog video output for compatible monitors and MFDs.

Key Specifications

• FLIR MD-625 static thermal night-vision camera with joystick-control bundle, SKU 432-0005-01-JCU.
• Fixed-mount thermal camera with a 640 × 512 uncooled VOx microbolometer.
• 640 × 480 NTSC/PAL analog video output.
• 25° × 20° field of view and 2× digital zoom.
• Includes a compatible joystick control unit for supported camera functions.
• Supports NMEA 0183 heading data for compatible tracking functions.
• 12V/24V DC input with less than 10W nominal consumption and up to 20W with heater operation.
• IPX6 weather protection, operating temperature range of -13°F to 131°F (-25°C to 55°C), and approximately 3.1 lb (1.4 kg) camera weight.
• Fixed deck or mast installation; the camera does not pan or tilt.

Integration

The bundle needs a compatible monitor, MFD, or analog video input to show the camera image. It is not a chartplotter, radar, GPS receiver, Ethernet IP camera, or autonomous navigation device. Confirm that the intended display supports NTSC/PAL composite video and identify any BNC, RCA, or display-specific adapter requirements before installation.

A fixed thermal camera can help supplement awareness in darkness, but it cannot guarantee detection or identification of every person, vessel, marker, or floating hazard. Actual image quality depends on thermal contrast, humidity, weather, sea state, lens cleanliness, and the selected mounting position.

Installation Notes

Because the MD-625 has a fixed field of view, test its intended coverage before drilling. Choose a stable deck or mast location that is clear of rails, rigging, antennas, deck lights, exhaust, and radar shadowing. Mount the joystick at the helm where it remains easy to reach without interfering with vessel controls.

Use protected 12V/24V wiring, sealed analog-video connections, and suitable circuit protection. Route camera, control, and NMEA wiring away from heat, sharp edges, water accumulation, moving equipment, and high-current cables. Have a qualified installer configure the control unit and verify camera operation.

Before Ordering

Confirm compatible analog video input, required NTSC/PAL format, joystick compatibility, intended fixed viewing direction, 12V/24V power availability, mounting location, cable routing, and whether a fixed camera meets the vessel’s thermal-viewing needs.