DRS25ANXT/4 Radar Pedestal 4 Array – 15M Cable

Description

Expand offshore radar awareness with the Furuno DRS25A-NXT/4, a 200W solid-state Doppler system that pairs a 4-foot open array with a 15-meter power-and-Ethernet cable. Its 1.9° horizontal beam and up to 96 NM instrumented range give captains a practical combination of detailed bearing separation and broad coverage for long runs, fishing grounds, and busy approach channels. Need moving-target information without magnetron warm-up time? This Furuno system combines Target Analyzer, Fast Target Tracking, Bird Mode, and RezBoost support through compatible NavNet displays.

Key Specifications

• Furuno DRS25A-NXT/4 solid-state Doppler open-array radar system.
• 200W solid-state pulse-compression radar with a 4-foot open-array antenna.
• Includes radar pedestal, 4-foot array, and 15-meter power/Ethernet cable.
• Up to 96 NM instrumented range.
• 1.9° horizontal beamwidth, with an effective 1.5° beamwidth using compatible RezBoost processing.
• Supports Target Analyzer Doppler, Fast Target Tracking, Bird Mode, and compatible ARPA functions.
• Supports 24, 36, and 48 RPM rotation modes; dual-range operation is available at 24 RPM.
• 12V–24V DC input, approximately 110W maximum power consumption, and IP56 protection.
• Approximate component weights: 41.4 lb pedestal and 11 lb 4-foot array.

Integration

The DRS25A-NXT/4 requires a compatible Furuno NavNet TZtouch, TZtouch2, TZtouch3, or supported TimeZero display for radar control and video. Radar video uses Furuno Ethernet; NMEA 2000 can supply compatible GPS, heading, AIS, autopilot, and sensor data but does not carry radar video.

Target Analyzer uses Doppler processing to help show relative target movement, while Fast Target Tracking, ARPA, and radar overlay require compatible display support and suitable heading and position data. The 96 NM figure is an instrumented range; real detection performance varies with target size, scanner height, weather, rain, sea state, clutter, and radar configuration.

Installation Notes

Mount the pedestal and 4-foot rotating array on a rigid, level platform with adequate structural strength and full rotation clearance. Keep it clear of people, antennas, masts, rigging, lights, exhaust, and structures that can create radar shadow sectors. Route the supplied 15-meter cable away from heat, chafe, water, high-current conductors, and moving equipment.

Follow Furuno requirements for circuit protection, mounting torque, grounding, safe distances, and bearing alignment. Radar is a navigation aid and does not replace a proper lookout, safe speed, charts, or collision-regulation compliance. Furuno identifies the DRS25A-NXT as a 200W solid-state Doppler radar and offers a 15-meter combined power/Ethernet cable for the platform. [821][823]

Before Ordering

Confirm compatible Furuno display support, Ethernet-network capacity, supplied 15-meter cable routing, 12V/24V power capacity, 4-foot array clearance, mounting strength, and heading/GPS sensor requirements before ordering.