E-Z Anchor Puller Sailor 3 HD 27′ Boat Drum Winch

Description

A captive drum that carries rope and chain together defines theE-Z Anchor Puller Sailor 3 HD. Its 1,100W 12V DC motor drives a horizontal drum winch for multi-species sportfishers and bay boats from 24 to 32 ft. The unit has a stated structural peak pull of 4,350 lbs and a separate 650 lbs continuous working-load rating.

The drum holds up to 260 ft of 1/2 in rope plus 20 ft of 1/4 in chain. The confirmed rode combination uses 1/2 in double-braid or three-strand nylon with 1/4 to 5/16 in G4 chain. A 40:1 oil-bath worm gear and emergency free-fall clutch form the listed drive and manual-drop arrangement.

Key Features of the Sailor 3 HD Drum Winch

• Up to 260 ft of 1/2 in rope fits the captive drum with 20 ft of chain.
• For matched rode sizing, the drum accepts 1/4 to 5/16 in G4 chain.
• Double-braid or three-strand nylon rope matches the confirmed 1/2 in drum configuration.
• At 650 lbs, the working-load rating guides regular anchor retrieval assessment.
• Structural peak pull reaches 4,350 lbs, separate from the listed continuous working-load rating.
• A 40:1 self-locking worm gear forms the listed oil-bath drive architecture.
• Emergency manual drop uses the listed free-fall clutch mechanism.
• Marine-grade 316 stainless steel forms the spool base, drum, and core plates.
• At working load, the motor draws 65A and requires a 100A circuit breaker.

Which Boats This Drum Winch Fits

The Sailor 3 HD drum winch is recommended for multi-species sportfishers and bay boats from 24 to 32 ft. The captive drum uses a specific rope-and-chain combination rather than a general rope-to-chain gypsy. Boat owners should confirm that 1/2 in nylon rope and 1/4 to 5/16 in G4 chain match both the listed capacity and their intended anchor rode.

The 4,350 lbs figure is identified as structural peak pull. The separate 650 lbs continuous working-load rating gives the relevant number for regular hauling assessment. These values describe different conditions and should not be treated as the same operating limit.

Materials, Technology and Use

Marine-grade 316 stainless steel forms the spool base, drum, and core plates. The oil-bath worm gear uses the listed 40:1 self-locking ratio, while the emergency free-fall clutch provides the listed manual-drop function. These features define the listed drum-winching arrangement rather than a chain-gypsy windlass system.

Salt deposits, sand, mud, and debris can still collect around the stainless steel drum, rope, chain, and drive area. Routine fresh-water cleaning and visual inspection remain necessary. Follow manufacturer documentation for gearbox service and clutch operation.

Compatibility and Installation

The E-Z Anchor Puller drum winch operates from 12V DC, draws 65A at the listed working load, and requires a 100A circuit breaker. The unit weighs 54 lbs. The available data does not provide deck thickness, dimensions, mounting details, or included control hardware, so installers should consult manufacturer documentation before drilling or routing cables.

Electrical planning should account for working-load charging demand alongside the listed current draw and breaker requirement. The provided product data does not confirm a switch, contactor, anchor, rope, chain, or circuit breaker as included.

Care and Operating Notes

Rinse the drum, rope, chain, stainless steel hardware, and nearby deck area with fresh water after saltwater exposure. Remove salt, sand, mud, and debris before operating the winch. Inspect the rope, chain, emergency clutch, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for oil-bath gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Sailor 3 HD carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, rope, chain, shipping, controls, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your rode uses 1/2 in double-braid or three-strand nylon rope with 1/4 to 5/16 in G4 chain. You should compare your boat with the 24 to 32 ft application guide, account for the 54 lbs unit mass, and verify the mounting arrangement through manufacturer documentation. Confirm that your 12V system supports the listed 65A draw at working load with a 100A circuit breaker. Verify package contents with the seller before ordering.