Muir Storm VR1250 1000W 1100lb Low-Profile Windlass

Description

A 1,000W 12V DC motor and a low-profile vertical gypsy define theMuir Storm VR1250. The windlass has a stated maximum pull of 1,100 lbs and a 275 lbs continuous working-load rating. Its mirror-polished marine-grade 316 stainless steel exterior forms the listed deck housing.

The gypsy accepts 1/4 in or 5/16 in chain with 1/2 in three-strand rope. A compact right-angle worm reduction layout transfers motor output, while the fall-safe mechanical lock and socket clutch provide the listed holding and release functions.

Key Features of the Storm VR1250 Windlass

• A 1,000W 12V motor powers the low-profile vertical gypsy for matched anchor rode retrieval.
• For correct fitment, use 1/4 in or 5/16 in chain with 1/2 in three-strand rope.
• At 275 lbs, the working-load rating provides the relevant value for regular hauling assessment.
• Maximum pull reaches 1,100 lbs, separate from the listed continuous working-load rating.
• A compact right-angle worm layout forms the listed reduction drive architecture.
• The fall-safe mechanical lock provides the listed anchor-holding function.
• Socket clutch action manages the listed anchor rode release function.
• At working load, current draw measures 50A and requires an 80A circuit breaker.
• Mirror-polished 316 stainless steel forms the exterior deck housing.
• the listed line speed reaches 59 ft/min under the listed performance specification.

Which Boats This Windlass Fits

The Storm VR1250 windlass is recommended for cruising sailboats and center consoles from 26 to 38 ft. Its gypsy requires the selected 1/4 in or 5/16 in chain to match 1/2 in three-strand rope. Buyers should confirm both chain diameter and rope size before selecting anchor rode components.

The 1,100 lbs figure is the listed maximum pull rating. The 275 lbs working-load rating provides the separate continuous hauling value. Boat owners should use the continuous figure when assessing normal anchor retrieval requirements.

Materials, Technology and Use

Mirror-polished marine-grade 316 stainless steel forms the core exterior housing. The compact right-angle worm reduction layout provides the listed gearbox architecture. A fall-safe mechanical lock and socket clutch form the listed anchor-holding and release assembly.

Salt deposits, sand, and debris can still collect around the stainless steel housing, gypsy, rope-to-chain transition, and deck hardware. Regular cleaning and inspection remain necessary. The low-profile configuration uses a gypsy only and does not include a warping drum.

Compatibility and Installation

The Muir vertical windlass operates on 12V DC, draws 50A at the listed working load, and requires an 80A circuit breaker. the listed dry weight is 34.2 lbs. The available product details do not list deck thickness, mounting dimensions, clearance requirements, or control inclusions.

Electrical planning should consider 50A charging requirements alongside the listed working-load current and circuit protection. Consult manufacturer installation documentation for mounting, cable routing, and below-deck clearance details.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, mechanical lock, and socket clutch with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition before operation. Inspect chain links, rope condition, clutch action, lock movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Storm VR1250 carries a 3-year limited commercial and pleasure marine warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that your anchor rode uses 1/4 in or 5/16 in chain with 1/2 in three-strand rope. You should compare your boat with the 26 to 38 ft application guide, allow for the 34.2 lbs unit mass, and confirm that the 12V system supports the listed 50A working-load draw with an 80A circuit breaker. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance.