Muir Storm VR3500 1500W 3500lb Low-Profile Windlass

Description

A 1,500W motor and a 50:1 right-angle worm gearbox define theMuir Storm VR3500low-profile vertical windlass. Available in 12V or 24V DC configurations, it has a stated maximum pull of 3,500 lbs and a continuous working-load rating of 875 lbs. The mirror-polished 316 stainless steel exterior forms the listed deck housing.

The gypsy handles either 3/8 in or 1/2 in chain with 5/8 to 3/4 in three-strand rope. An integrated manual-drop clutch and emergency braking handle provide the listed manual control functions. the listed data identifies a gypsy-only, low-profile deck configuration.

Key Features of the Storm VR3500 Windlass

• A 1,500W motor operates in the available 12V or 24V DC configuration.
• For matched rode handling, select 3/8 in or 1/2 in chain with 5/8 to 3/4 in rope.
• At 875 lbs, the continuous working-load rating guides normal retrieval assessment.
• Maximum pull reaches 3,500 lbs, separate from the listed continuous working-load figure.
• A 50:1 right-angle worm gearbox provides the listed reduction drive architecture.
• Manual rode release uses the integrated drop clutch described for this windlass.
• An emergency braking handle forms part of the listed manual-control arrangement.
• At 12V, the listed draw is 90A with a 135A breaker requirement.
• At 24V, the listed draw is 50A with an 80A breaker requirement.
• Mirror-polished 316 stainless steel forms the listed exterior deck housing.

Which Boats This Windlass Fits

The Storm VR3500 low-profile windlass is recommended for offshore motor yachts and cruisers from 42 to 60 ft. Its gypsy must match the selected 3/8 in or 1/2 in chain and 5/8 to 3/4 in three-strand rope. Buyers should confirm both the voltage configuration and rode dimensions before ordering.

The 3,500 lbs figure represents the listed maximum pull. The 875 lbs working-load rating provides the separate continuous hauling value. These ratings serve different operating conditions and should not be used interchangeably.

Materials, Technology and Use

Mirror-polished marine-grade 316 stainless steel forms the core exterior housing. The right-angle worm gearbox uses the listed 50:1 reduction ratio. An integrated manual-drop clutch and emergency braking handle provide the listed manual release and braking functions.

Salt deposits and debris can still collect around the stainless steel housing, gypsy, rope-to-chain transition, and deck hardware. Regular cleaning and inspection remain necessary. The low-profile configuration uses a gypsy only and does not include a warping drum.

Compatibility and Installation

The Muir vertical windlass weighs 76 lbs. It is available in 12V DC with a stated 90A draw and 135A breaker, or 24V DC with a 50A draw and 80A breaker. The available product details do not list deck thickness, mounting dimensions, or included controls, so installers should consult manufacturer documentation before installation.

System planning should align the selected voltage with dual-voltage charging requirements and the listed breaker arrangement. The provided product data does not confirm a contactor, controls, anchor, chain, rope, or circuit breaker as included.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, and emergency braking handle with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition and manual-drop clutch before operation. Inspect chain links, rope condition, clutch movement, brake-handle access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubrication, disassembly, and approved replacement parts.

Warranty and Support

The Storm VR3500 carries a 3-year limited commercial and pleasure marine warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether the boat uses the 12V or 24V configuration, then match the breaker requirement and stated current draw to that choice. You should select 3/8 in or 1/2 in chain with 5/8 to 3/4 in three-strand rope, compare the vessel with the 42 to 60 ft application guide, and allow for the 76 lbs unit mass. Consult manufacturer documentation for deck thickness, mounting dimensions, and below-deck clearance.