Muir Storm VRC2500 1200W 2500lb Capstan Windlass

Description

A 1,200W motor, vertical gypsy, and knurled capstan drum define theMuir Storm VRC2500configuration. Available in 12V or 24V DC, the windlass has a stated maximum pull of 2,500 lbs and a 625 lbs continuous working-load rating. Polished marine-grade 316 stainless steel forms the deck unit and capstan drum.

The gypsy handles 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope. A 45:1 right-angle worm gearbox transfers motor output. The integrated manual-drop clutch and emergency braking handle provide the listed manual-control functions.

Key Features of the Storm VRC2500 Windlass

• A 1,200W motor operates in the available 12V or 24V DC configuration.
• For matched rode handling, select 5/16 in or 3/8 in chain with 9/16 to 5/8 in rope.
• At 625 lbs, the working-load rating guides regular anchor retrieval assessment.
• Maximum pull reaches 2,500 lbs, separate from the listed continuous working-load figure.
• A 45:1 right-angle worm gearbox provides the listed reduction drive architecture.
• The knurled capstan drum supports separate line handling beside the anchor gypsy.
• Manual rode release uses the integrated drop clutch described for this windlass.
• An emergency braking handle forms part of the listed manual-control arrangement.
• At 12V, the listed draw is 75A with a 100A breaker requirement.
• At 24V, the listed draw is 40A with a 60A breaker requirement.

Which Boats This Windlass Fits

The Storm VRC2500 windlass is recommended for offshore cruisers and yachts from 35 to 50 ft. Its gypsy requires the selected 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope. Buyers should confirm both rode dimensions and the intended 12V or 24V electrical system before ordering.

The 2,500 lbs figure represents the listed maximum pull rating. The 625 lbs working-load rating provides the separate continuous hauling value. These ratings describe different operating conditions and should not be used interchangeably.

Materials, Technology and Use

Polished marine-grade 316 stainless steel forms the deck unit and knurled capstan drum. The right-angle worm gearbox uses the listed 45:1 reduction ratio. An integrated manual-drop clutch and emergency braking handle provide the listed release and braking functions.

Salt deposits, sand, and debris can still collect around the stainless steel deck unit, gypsy, capstan, rope-to-chain transition, and deck hardware. Regular cleaning and inspection remain necessary. The capstan drum supports line work separate from the compatible anchor rode.

Compatibility and Installation

The Muir vertical windlass weighs 67.2 lbs. The 12V version has a stated 75A draw with a 100A breaker requirement, while the 24V version has a 40A draw with a 60A breaker requirement. The available product details do not list deck thickness, dimensions, mounting details, or control inclusions.

Electrical planning should align the selected voltage with voltage-specific charging design and the corresponding circuit-breaker requirement. Consult manufacturer installation documentation for deck structure, mounting, cable routing, and capstan-clearance details.

Care and Operating Notes

Rinse the deck unit, gypsy, capstan drum, chain, rope, manual-drop clutch, and braking handle with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition before operation. Inspect chain links, rope condition, clutch movement, brake-handle access, drum surface, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Storm VRC2500 carries a 3-year limited commercial and pleasure marine warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm whether the boat uses the 12V or 24V configuration, then match the listed current draw and breaker requirement to that choice. You should select 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope, compare the vessel with the 35 to 50 ft application guide, and allow for the 67.2 lbs unit mass. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and required clearance.