Muir Cheetah HR2500 1200W 2500lb Yacht Anchor Windlass

Description

A horizontal gypsy and independent warping drum define theMuir Cheetah HR2500anchoring configuration. Its 1,200W motor is available in 12V or 24V DC versions and has a stated maximum pull of 2,500 lbs. The continuous working-load rating is 625 lbs, while the polished 316 stainless steel exterior forms the listed deck housing.

The gypsy accepts 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope. A 45:1 right-angle worm gearbox transfers motor output. The fall-safe anchor lock and fast recovery handle provide the listed holding and manual-control functions.

Key Features of the Cheetah HR2500 Windlass

• A 1,200W motor operates in the available 12V or 24V DC configuration.
• For matched rode handling, select 5/16 in or 3/8 in chain with 9/16 to 5/8 in rope.
• At 625 lbs, the working-load rating guides regular anchor retrieval assessment.
• Maximum pull reaches 2,500 lbs, separate from the listed continuous working-load figure.
• A 45:1 right-angle worm gearbox provides the listed reduction drive architecture.
• The independent warping drum handles separate line work beside the anchor gypsy.
• A fall-safe anchor lock forms the listed anchor-holding system.
• The fast recovery handle provides the listed manual-control feature.
• At 12V, current draw is 75A with a 100A circuit breaker requirement.
• At 24V, current draw is 40A with a 60A circuit breaker requirement.

Which Boats This Windlass Fits

The Cheetah HR2500 windlass is recommended for sportfishers and pilothouse yachts from 35 to 52 ft. Its gypsy requires either 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope. Buyers should confirm both rode dimensions and the selected 12V or 24V electrical configuration before ordering.

The 2,500 lbs figure represents the listed maximum pull rating. The 625 lbs working-load rating provides the separate continuous hauling value. These values describe different operating conditions and should not be used interchangeably.

Materials, Technology and Use

Polished marine-grade 316 stainless steel forms the exterior housing. The right-angle worm gearbox uses the listed 45:1 reduction ratio. A fall-safe anchor lock and fast recovery handle provide the listed anchor-holding and manual-control features, while the independent warping drum supports separate line handling.

Salt deposits, sand, and debris can still collect around the stainless steel housing, gypsy, drum, rope-to-chain transition, and deck hardware. Regular cleaning and inspection remain necessary. Follow manufacturer guidance for gearbox service and anchor-lock operation.

Compatibility and Installation

The Muir horizontal windlass weighs 72.6 lbs. In 12V configuration, it has a stated 75A draw with a 100A breaker requirement. In 24V configuration, it has a stated 40A draw with a 60A breaker requirement. The available product details do not list mounting dimensions, deck thickness, clearance requirements, or control inclusions.

Electrical planning should align the selected voltage with dual-voltage charging support and the corresponding breaker requirement. Consult manufacturer installation documentation for deck mounting, cable routing, access, and drum-clearance details.

Care and Operating Notes

Rinse the housing, gypsy, drum, chain, rope, anchor lock, and recovery handle with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition before operation. Inspect chain links, rope condition, lock movement, handle access, drum surface, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Cheetah HR2500 carries a 3-year limited commercial and pleasure marine warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm whether the boat uses the 12V or 24V configuration, then match the listed current draw and breaker requirement to that choice. You should select 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope, compare the vessel with the 35 to 52 ft application guide, and allow for the 72.6 lbs unit mass. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and required clearance.