Maxwell RC10/8 12V AUTOMATIC ROPE CHAIN WINDLASS 5/16″ CHAIN TO 5/8″ ROPE

Description

A 1,000W 12V motor in a low-profile vertical deck unit defines theMaxwell RC10-8rope-to-chain windlass. The windlass has a stated maximum pull of 1,540 lbs and a 550 lbs continuous working-load rating. Its heavy chrome-plated bronze deck unit uses a stainless steel shaft within the listed assembly.

The gypsy accepts 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. The patented Wave Design gypsy includes an integrated manual override. This low-profile configuration handles the listed anchor rode without a capstan drum.

Key Features of the RC10-8 Vertical Windlass

• A 1,000W 12V motor powers the low-profile gypsy for rope-to-chain anchor retrieval.
• For correct gypsy engagement, use 5/16 in short-link chain with 9/16 to 5/8 in rope.
• Three-strand or 8-plait rope matches the listed compatibility range.
• At 550 lbs, the working-load rating guides regular anchor retrieval assessment.
• Maximum pull reaches 1,540 lbs, separate from the listed continuous working load.
• The patented Wave Design gypsy forms the listed chain and rope handling system.
• An integrated manual override provides the listed alternate control feature.
• At no load, the rated line speed reaches 79 ft/min.
• At working load, the rated line speed reaches 65 ft/min.
• A 100A circuit breaker is required for the 12V electrical circuit.

Which Boats This Windlass Fits

The RC10-8 vertical windlass is recommended for coastal cruisers, sailboats, and sportfishers from 30 to 45 ft. Its gypsy requires 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. Buyers should match chain link style, chain diameter, rope size, and rope construction before selecting anchor rode components.

The 1,540 lbs figure represents the listed maximum pull rating. The 550 lbs working-load rating provides the separate continuous hauling value. The continuous figure gives the relevant reference for normal anchor retrieval planning.

Materials, Technology and Use

The heavy chrome-plated bronze deck unit forms the exposed housing, while the stainless steel shaft supports the listed assembly. The IP66 rating applies to the listed motor enclosure. The Wave Design gypsy and integrated manual override provide the listed handling and manual-control functions.

Salt deposits, sand, and debris can still collect around chrome-plated bronze, the gypsy, rope-to-chain transition, and deck hardware. Regular cleaning and inspection remain necessary. This low-profile gypsy-only arrangement does not include a separate capstan drum.

Compatibility and Installation

The Maxwell vertical windlass measures 89 mm above deck with a 170 mm base diameter and weighs 40.7 lbs. Installers should verify deck structure, mounting space, cable routing, override access, and below-deck clearance before installation. The available product details do not list a deck-thickness range.

The 12V electrical system requires a 100A circuit breaker. System planning can include 100A charging preparation around the listed circuit-protection requirement. The provided product data does not state average current draw or confirm control components as included.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, and accessible shaft surfaces with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and gypsy before operation. Inspect chain links, rope condition, manual-override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gypsy service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The RC10-8 carries a 3-year limited manufacturer warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that your anchor rode uses 5/16 in short-link chain with 9/16 to 5/8 in three-strand or 8-plait rope. You should compare your vessel with the 30 to 45 ft application guide, reserve space for the 89 mm above-deck height and 170 mm base diameter, and confirm the 12V system can use the required 100A breaker. Consult manufacturer installation documentation for deck thickness, mounting dimensions, and below-deck clearance.