Muir Storm VR2500 1200W 2500lb Low-Profile Windlass

Description

A 1,200W motor and a 45:1 right-angle worm gearbox define theMuir Storm VR2500low-profile vertical windlass. Available in 12V or 24V DC versions, it has a stated maximum pull of 2,500 lbs and a 625 lbs continuous working-load rating. Mirror-polished 316 stainless steel forms the core exterior housing.

The gypsy handles 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope. An integrated manual-drop clutch and emergency braking handle provide the listed manual control functions. This configuration uses a low-profile vertical gypsy without a warping drum.

Key Features of the Storm VR2500 Windlass

• A 1,200W motor operates in the available 12V or 24V DC configuration.
• Match 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope.
• For normal hauling assessment, use the 625 lbs continuous working-load rating.
• Maximum pull reaches 2,500 lbs, a separate peak rating from the continuous load.
• A 45:1 right-angle worm gearbox forms the listed reduction drive architecture.
• The integrated manual-drop clutch provides the listed rode-release function.
• An emergency braking handle forms part of the listed manual-control arrangement.
• At 12V, the listed current draw is 75A with a 100A breaker.
• At 24V, the listed current draw is 40A with a 60A breaker.
• Mirror-polished 316 stainless steel forms the listed exterior deck housing.

Which Boats This Windlass Fits

The Storm VR2500 low-profile windlass is recommended for sportfishing cruisers and yachts from 35 to 50 ft. Its gypsy requires the selected 5/16 in or 3/8 in chain combined with 9/16 to 5/8 in three-strand rope. Buyers should confirm both rode sizes and the intended 12V or 24V system before ordering.

the listed maximum pull is 2,500 lbs. The 625 lbs working-load rating provides the separate continuous hauling value. Boat owners should use the continuous figure when assessing regular anchor retrieval requirements.

Materials, Technology and Use

Mirror-polished marine-grade 316 stainless steel forms the core exterior housing. The right-angle worm gearbox uses the listed 45:1 reduction ratio. An integrated manual-drop clutch and emergency braking handle provide the listed release and braking functions.

Salt deposits, sand, and debris can still collect around stainless steel housing, the gypsy, rope-to-chain transition, and deck hardware. Regular cleaning and inspection remain necessary. The gypsy-only design does not include a separate warping drum.

Compatibility and Installation

The Muir vertical windlass weighs 60.6 lbs. The 12V version has a stated 75A draw and 100A breaker requirement, while the 24V version has a 40A draw and 60A breaker requirement. The available product details do not list deck thickness, dimensions, mounting information, or confirmed included controls.

Electrical planning should consider voltage-specific charging support alongside the selected voltage and breaker requirement. Consult manufacturer documentation for mounting, below-deck clearance, cable routing, and control-system details before installation.

Care and Operating Notes

Rinse the housing, gypsy, chain, rope, manual-drop clutch, and emergency braking handle with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the rope-to-chain transition before operation. Inspect chain links, rope condition, clutch movement, brake-handle access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for gearbox service, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Storm VR2500 carries a 3-year limited commercial and pleasure marine warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether the boat uses the 12V or 24V configuration, then match the listed current draw and breaker requirement to that choice. You should select 5/16 in or 3/8 in chain with 9/16 to 5/8 in three-strand rope, compare the vessel with the 35 to 50 ft application guide, and allow for the 60.6 lbs unit mass. Consult manufacturer documentation for deck thickness, mounting dimensions, and below-deck clearance.