Lewmar V2GD Vertical Windlass (Gypsy / Drum) – For Boats Up To 40 Ft., Pulling Power: 1433 lbs.

Description

TheLewmar V2GDcombines a 700W 12V DC motor with a vertical gypsy and warping drum arrangement. The windlass has a stated maximum pull of 1,433 lbs and a 360 lbs continuous working-load rating. Its precision-cast 316 stainless steel body and AISI 316 shaft form the listed deck and drive assembly.

The gypsy accepts 5/16 in DIN 766 or ISO 4565 chain with 1/2 to 5/8 in three-strand rope. A Fast-Fit free-fall system includes an integrated manual override, while the warping drum provides separate line handling. The provided product data does not confirm an anchor, rode, switch, contactor, or breaker as included.

Key Features of the V2GD Gypsy and Drum Windlass

• The 700W 12V DC motor powers vertical gypsy and warping drum operation.
• The gypsy accepts 5/16 in DIN 766 or ISO 4565 chain.
• The rope section handles 1/2 to 5/8 in three-strand rope.
• The warping drum provides separate line handling beside the anchor rode gypsy.
• The Fast-Fit system provides the listed free-fall release function.
• The integrated manual override provides a separate stated control feature.
• The 360 lbs working-load rating identifies the continuous hauling load.
• The 1,433 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 69 ft/min without a working load.
• A 90A slow-blow breaker is required for circuit protection.

Which Boats This Windlass Fits

The V2GD gypsy and drum windlass is recommended for power and sailboats up to 40 ft. Its gypsy requires 5/16 in DIN 766 or ISO 4565 chain with 1/2 to 5/8 in three-strand rope. The chain standard, chain diameter, and rope diameter must match the confirmed gypsy configuration before selecting anchor rode components.

the listed maximum pull is 1,433 lbs. The 360 lbs working-load rating identifies the separate continuous hauling value. Boat owners should use the continuous rating when evaluating regular retrieval requirements.

Materials, Technology and Use

Precision-cast 316 stainless steel forms the exposed deck body, while the AISI 316 shaft supports the drive assembly. the listed IP67 rating applies to the motor and gearbox. The product data also states CE approval. The Fast-Fit system controls the listed free-fall function, and the warping drum provides separate line handling.

Salt deposits, sand, and debris can still collect around stainless steel hardware, the gypsy, the warping drum, and the deck surface. Regular cleaning and inspection remain necessary. The 205 mm unit height reflects the listed gypsy-and-drum arrangement.

Compatibility and Installation

The Lewmar vertical windlass fits deck thicknesses from 1.0 to 2.0 in. The deck unit measures 205 mm high with a 155 mm base diameter and weighs 33 lbs. Installers should verify the mounting area, below-deck motor space, cable route, manual override access, and drum clearance before installation.

The 12V DC system draws an average of 80A and requires a 90A slow-blow breaker. the listed electrical requirements should be reviewed with battery charging equipment during installation planning. The provided product data does not confirm a switch, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the housing, gypsy, warping drum, chain, and rope with fresh water after saltwater exposure. Clear salt, sand, mud, and debris from the rope-to-chain transition and free-fall release area before operation. Inspect chain links, rope condition, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The V2GD carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 5/16 in DIN 766 or ISO 4565 chain with 1/2 to 5/8 in three-strand rope. You should compare your boat with the up-to-40-ft application guide, measure deck thickness against the 1.0 to 2.0 in range, and allow for the 205 mm height, 155 mm base diameter, and 33 lbs dry weight. Verify that your 12V system supports the listed 80A average draw and required 90A slow-blow breaker. Confirm controls, circuit-protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.