Lewmar V3G Vertical Windlass (Gypsy) – For Boats 40 – 50 Ft., Max. Pull: 1962 lbs

Description

TheLewmar V3Guses a 1,000W 12V DC motor in a low-profile vertical gypsy-only configuration for 3/8 in chain and rope anchor rode handling. The windlass has a stated maximum pull of 1,962 lbs and a 492 lbs continuous working-load rating. Its cast 316 stainless steel body and AISI 316 shaft form the deck and drive assembly.

The gypsy accepts 3/8 in ISO 4565 or DIN 766 chain with 9/16 to 5/8 in three-strand rope. The Fast-Fit free-fall system includes a built-in manual override. The provided product data does not confirm an anchor, rode, switch, contactor, or circuit breaker as included.

Key Features of the V3G Vertical Windlass

• The 1,000W 12V DC motor powers vertical anchor rode retrieval.
• The gypsy accepts 3/8 in ISO 4565 or DIN 766 chain.
• The rope section handles 9/16 to 5/8 in three-strand rope.
• The Fast-Fit system provides the listed free-fall release function.
• The built-in manual override provides a separate stated control feature.
• The 492 lbs working-load rating identifies the continuous hauling load.
• The 1,962 lbs maximum pull figure states the product’s peak pull rating.
• The rated no-load speed reaches 92 ft/min without a working load.
• The windlass reaches 72 ft/min at its stated working-load rating.
• A 110A circuit breaker is required for electrical circuit protection.

Which Boats This Windlass Fits

The V3G vertical windlass is recommended for power and sailboats from 40 to 50 ft. Its gypsy requires 3/8 in ISO 4565 or DIN 766 chain with 9/16 to 5/8 in three-strand rope. The chain standard, chain diameter, and rope diameter should all match the confirmed configuration before selecting the anchor rode.

the listed maximum pull is 1,962 lbs. The 492 lbs working-load rating provides the separate continuous hauling value. Buyers should use the continuous figure when reviewing normal retrieval requirements rather than treating maximum pull as an ongoing load rating.

Materials, Technology and Use

Cast 316 stainless steel forms the exposed deck body, while the AISI 316 shaft supports the drive assembly. the listed IP67 rating applies to the sealed motor and gearbox. The Fast-Fit free-fall system manages the listed release function, and the built-in manual override provides an additional stated operating feature.

The product data also states CE approval and a Lloyd’s certified gearbox. Salt deposits and debris can still collect on stainless steel hardware, the gypsy, and surrounding deck surfaces. Regular cleaning and inspection remain necessary.

Compatibility and Installation

The Lewmar vertical windlass fits deck thicknesses from 1.0 to 2.0 in. The deck unit measures 110 mm above deck with a 182 mm base diameter and weighs 47.4 lbs. Installers should confirm below-deck motor and gearbox space, cable routing, mounting area, and access to the manual override before installation.

The 12V DC system draws an average of 100A and requires a 110A circuit breaker. Electrical planning should consider windlass power planning alongside the listed current draw and breaker rating. The provided product data does not confirm a switch, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the exposed housing, gypsy, chain, and rope with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the chain links, rope-to-chain transition, and free-fall release area before operation. Inspect the chain, rope, manual override access, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for lubricant selection, service intervals, disassembly, and approved replacement parts.

Warranty and Support

The V3G carries a 3-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, electrical accessories, shipping, or other components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm that your anchor rode uses 3/8 in ISO 4565 or DIN 766 chain with 9/16 to 5/8 in three-strand rope. You should compare your boat with the 40 to 50 ft application guide, measure deck thickness against the 1.0 to 2.0 in range, and reserve room for the 110 mm above-deck height and 182 mm base diameter. Verify that your 12V electrical system supports the listed 100A average draw and required 110A circuit breaker. Confirm controls, circuit-protection hardware, anchor, chain, and rope with the seller because the provided product data does not confirm them as included.