Anchor Winch Sailor 2 HD – Aluminum Alloy Direct Drive Drum Anchor Winch For Boats To 24

Description

TheSailor 2 HDuses a 700W 12V DC motor in a horizontal direct-drive captive drum configuration. Its stated maximum pull reaches 992 lbs, while the continuous working-load rating is 253 lbs. A hard-anodized marine aluminum alloy body and 316 stainless steel shaft form the listed drum and drive assembly.

The drum stores up to 60 m of 8 mm rope or 45 m of 10 mm rope plus chain leader. A mechanical manual free-spool release manages the listed release function. The provided product data does not confirm an anchor, rope, chain leader, controls, contactor, or circuit breaker as included.

Key Features of the Sailor 2 HD Drum Winch

• Direct drive transfers the 700W 12V motor output to the captive drum.
• Up to 60 m of 8 mm rope fits the drum with the listed chain-leader arrangement.
• Using 10 mm rope reduces stated drum capacity to 45 m plus chain leader.
• For routine hauling assessment, use the 253 lbs continuous working-load rating.
• Maximum pull reaches 992 lbs, a separate peak figure from the continuous load.
• Mechanical free-spool release provides the listed manual rode-release function.
• Hard-anodized aluminum forms the housing, while a 316 stainless shaft supports the drive.
• An IP66 rating applies to the listed watertight enclosure.
• Installation requires a 12V system with an 80A circuit breaker.
• the listed 26.5 lbs dry weight helps assess deck handling during installation.

Which Boats This Drum Winch Fits

The Sailor 2 HD drum winch is recommended for aluminum fishing boats and cruisers up to 24 ft. Its drum capacity changes with rope size, holding up to 60 m of 8 mm rope or 45 m of 10 mm rope with a chain leader. Buyers should confirm the planned rode diameter and capacity before ordering.

The 992 lbs figure represents the listed maximum pull rating. The 253 lbs working-load rating provides the separate continuous hauling value. The continuous figure gives the relevant reference for normal anchor retrieval planning.

Materials, Technology and Use

The hard-anodized marine aluminum alloy body forms the exposed housing, and the 316 stainless steel shaft supports the drive assembly. The IP66 rating applies to the watertight enclosure. A mechanical manual free-spool release forms part of the listed direct-drive system.

Salt, sand, and debris can still collect around the aluminum housing, stainless shaft, drum, rope, chain leader, and deck hardware. Regular cleaning and inspection remain necessary. The captive drum stores the specified rope-and-chain-leader combination without using a rope-to-chain gypsy.

Compatibility and Installation

The Sailor drum winch measures 255 mm high by 310 mm wide and weighs 26.5 lbs. Installers should verify deck support, mounting space, cable routing, drum clearance, and access to the manual release before fitting the unit. The available product details do not list a deck-thickness range.

The 12V DC system requires an 80A circuit breaker. Review 12V charging considerations alongside the confirmed circuit-protection requirement. The provided product data does not state average current draw or confirm controls, contactor, or circuit breaker as included.

Care and Operating Notes

Rinse the housing, drum, rope, chain leader, and exposed shaft with fresh water after saltwater exposure. Remove salt, sand, mud, and debris from the drum and manual release mechanism before operation. Inspect rope condition, chain leader, release movement, visible fasteners, and electrical connections before departure. Follow the manufacturer manual for service procedures, lubricant selection, disassembly, and approved replacement parts.

Warranty and Support

The Sailor 2 HD carries a 1-year limited manufacturer warranty. The provided warranty term does not define coverage for labor, corrosion, drum, rope, chain leader, shipping, or installation components. These terms reflect manufacturer-stated coverage, and buyers should verify active warranty policies directly with the seller or manufacturer prior to purchase.

Before Ordering

Confirm whether your anchor rode uses up to 60 m of 8 mm rope or up to 45 m of 10 mm rope with a chain leader. You should compare your boat with the up-to-24-ft application guide, reserve space for the 255 mm by 310 mm housing, and account for the 26.5 lbs dry weight. Verify that your 12V system can use the required 80A circuit breaker. Confirm controls, contactor, circuit protection, anchor, rope, chain leader, and mounting hardware with the seller because the provided product data does not confirm them as included.