AB Profile A12 12′ Professional Aluminum RIB Boat

Description

Using a powder-coated 3.18 mm, or 1/8 inch, aluminum deep-V hull, the AB Inflatables Profile A12 is a 3.66 m, or 12 ft, commercial aluminum RIB with a flat deck and integrated keel guard. Anti-slip pads cover the deck, while three buoyancy tubes use ORCA CSM 1670 dtex commercial fabric with cold-cured hand-laminated seams. The 155 kg, or 342 lb, net weight should be included in lifting, trailer, storage, and dock planning.

ISO capacity is five persons, and the 600 kg, or 1,323 lb, maximum payload applies to combined passenger and cargo loading. The transom requires a 20-inch long-shaft outboard, with 25 HP recommended, 40 HP maximum, and 105 kg, or 231 lb, maximum engine weight. Leafield C7 Push-Push valves and relief valves serve the three buoyancy chambers, and CE Category C applies to the stated inshore and coastal category.

Key Specifications of the AB Inflatables Profile A12 Rigid Inflatable Boat

• The commercial aluminum RIB measures 3.66 m, or 12 ft, overall and has a stated net weight of 155 kg.
• A powder-coated 3.18 mm aluminum deep-V hull includes a keel guard, defining the documented rigid-hull construction for this professional RIB.
• Powder-coated aluminum forms the flat deck, while anti-slip pads establish the stated open-deck surface for onboard layout planning.
• Three buoyancy tubes use ORCA CSM 1670 dtex commercial fabric with cold-cured hand-laminated seams for the documented tube construction.
• ISO capacity is five persons, and the 600 kg maximum payload sets the stated passenger and cargo limit.
• A 20-inch long-shaft outboard is required, with 25 HP recommended and 40 HP maximum for propulsion selection.
• Outboard weight must not exceed 105 kg, while Leafield C7 and relief valves serve the documented tube system.

Hull, Deck, and Capacity

An internal length of 2.70 m, or 8 ft 10 in, and an internal width of 0.89 m, or 2 ft 11 in, define the stated usable hull space. A 0.43 m, or 17 in, tube diameter accompanies the deep-V aluminum hull, flat deck, keel guard, and three buoyancy chambers.

Included equipment consists of a bow locker with cushion, heavy-duty double rubbing strake, full-length aluminum keel guard, bow lifting rings, stern lifting eyes, and heavy-duty towing eyes. Coordinate passenger loading, cargo arrangement, lifting, long-shaft outboard selection, engine output, and engine weight with the supplied capacity limits.

Why Choose the AB Inflatables Profile A12 Rigid Inflatable Boat

The Profile A12 rigid inflatable boat combines a 3.66 m aluminum deep-V hull with a flat deck, keel guard, three ORCA CSM buoyancy chambers, bow locker, lifting rings, towing eyes, and relief valves. Its 155 kg net weight, five-person ISO capacity, 600 kg payload limit, 20-inch long-shaft requirement, 25 HP recommendation, 40 HP maximum, and 105 kg engine limit provide direct comparison points against the Profile A12 Shallow Water configuration.

Setup and Outboard Considerations

The supplied boat includes a bow locker with cushion, double rubbing strake, full-length aluminum keel guard, bow lifting rings, stern lifting eyes, and heavy-duty towing eyes. Select a 20-inch long-shaft outboard before rigging, then keep its output at or below 40 HP and its weight at or below 105 kg. Inflate the three buoyancy chambers through the Leafield C7 Push-Push valves and account for the relief-valve arrangement.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and aluminum hull structure. Before checkout, Mulmarine.com can help you review the 3.66 m hull dimensions, 155 kg net weight, 600 kg payload limit, long-shaft outboard requirement, and 105 kg engine-weight limit against your lifting, trailer, deck-layout, and propulsion plan. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Profile A12 Rigid Inflatable Boat

Confirm that your lifting, trailer, dock, and storage plan supports the 3.66 m overall length and 155 kg net weight. You should use a 20-inch long-shaft outboard, select 25 HP as the recommended power level, avoid exceeding 40 HP or 105 kg engine weight, and remain within the five-person and 600 kg maximum capacity limits.