AB Lammina 7.5 UL – 2.39m ALU Hull Inflatable Boat (SIB)

Description

At 2.39 m, or 7 ft 10 in, the AB Inflatables Lammina 7.5 UL combines a powder-coated 2.28 mm, or 0.090 inch, aluminum V-hull with a single flat floor and full-length keel guard. The aluminum floor uses non-skid rubber pads, while two buoyancy chambers use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams. At 31 kg, or 68 lb, the boat should be assessed against lift, storage, transport, and docking requirements.

ISO capacity is three persons, and the 350 kg, or 771 lb, maximum payload applies to combined passenger and cargo loading. A 15-inch short-shaft outboard matches the transom configuration, with 4 HP recommended, 6 HP maximum, and a 30 kg, or 66 lb, engine-weight limit. Leafield C7 Push-Push valves serve the two buoyancy chambers, while CE Category D applies to the stated sheltered-waters classification.

Key Specifications of the AB Inflatables Lammina 7.5 UL Rigid Inflatable Boat

• The ultra-light open aluminum tender measures 2.39 m, or 7 ft 10 in, overall and has a 31 kg net weight.
• A powder-coated 2.28 mm aluminum V-hull includes a keel guard, defining the documented rigid-hull construction for this compact tender.
• The single flat aluminum floor uses non-skid rubber pads, establishing the specified deck surface for the open tender layout.
• Two buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the documented tube construction.
• ISO capacity is three persons, and the 350 kg maximum payload sets the stated passenger and cargo limit.
• A 15-inch short-shaft outboard is required, with 4 HP recommended and 6 HP maximum for propulsion selection.
• Outboard weight must not exceed 30 kg, requiring engine selection within the stated transom-loading limit before rigging.

Hull, Deck, and Capacity

An internal length of 1.62 m, or 5 ft 4 in, and an internal width of 0.70 m, or 2 ft 4 in, define the stated usable hull space. A 0.41 m, or 16 in, tube diameter accompanies the aluminum V-hull, single floor, keel guard, and two-chamber tube configuration.

Included equipment consists of an aluminum removable rowing bench, heavy-duty single rub rail, full-length aluminum keel guard, oars with molded oarlocks, bow lifting eye, and towing rings. Leafield C7 Push-Push valves serve the two buoyancy chambers. Keep passenger loading, payload, outboard power, and engine weight within the stated limits.

Why Choose the AB Inflatables Lammina 7.5 UL Rigid Inflatable Boat

The Lammina 7.5 UL rigid inflatable boat combines a 2.39 m aluminum V-hull with a single flat floor, removable rowing bench, full-length keel guard, and two ORCA CSM buoyancy chambers. Its 31 kg net weight, three-person ISO capacity, 350 kg payload rating, CE Category D designation, 15-inch short-shaft requirement, 4 HP recommended power, 6 HP maximum power, and 30 kg engine limit provide specific comparison points for a compact lightweight tender.

Setup and Outboard Considerations

Included components cover an aluminum removable rowing bench, single rub rail, full-length aluminum keel guard, oars with molded oarlocks, bow lifting eye, and towing rings. Match the transom with a 15-inch short-shaft outboard, then keep engine output at or below 6 HP and engine weight at or below 30 kg. Inflate both buoyancy chambers through the Leafield C7 Push-Push valves.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and aluminum hull structure. Mulmarine.com can help you review the 2.39 m hull dimensions, 31 kg net weight, 350 kg payload limit, short-shaft outboard requirement, and 30 kg engine-weight limit against your lifting, storage, transport, and propulsion plan before purchase. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Lammina 7.5 UL Rigid Inflatable Boat

Confirm that your lifting, storage, and dock plan supports the 2.39 m overall length and 31 kg net weight. You should use a 15-inch short-shaft outboard, select 4 HP as the recommended power level, avoid exceeding 6 HP or 30 kg engine weight, and remain within the three-person and 350 kg maximum capacity limits.