AB Lammina 10 UL 10′ Ultralight Aluminum Inflatable Boat

Description

At 3.05 m, or 10 ft, the AB Inflatables Lammina 10 UL combines a 2.28 mm, or 0.090 inch, powder-coated aluminum V-hull with a single flat aluminum floor and non-skid rubber pads. Its three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams, and the hull includes a keel guard. At 49 kg, or 108 lb, the boat should be matched with the planned lifting, trailer, storage, and dock arrangement.

ISO capacity is four persons, and the maximum payload is 450 kg, or 992 lb. The transom requires a 15-inch short-shaft outboard, with 9.9 HP recommended, 15 HP maximum, and a 50 kg, or 110 lb, engine-weight limit. Leafield C7 Push-Push valves serve the three buoyancy chambers, and CE Category C applies to the stated inshore and coastal category.

Key Specifications of the AB Inflatables Lammina 10 UL Rigid Inflatable Boat

• The ultra-light open aluminum tender measures 3.05 m, or 10 ft, overall and has a 49 kg net weight.
• A powder-coated 2.28 mm aluminum V-hull includes a keel guard, defining the documented rigid-hull construction for this lightweight tender.
• The single flat aluminum floor uses non-skid rubber pads, establishing the specified deck surface for the open tender layout.
• Three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the documented tube construction.
• ISO capacity is four persons, and the 450 kg maximum payload sets the stated passenger and cargo limit.
• A 15-inch short-shaft outboard is required, with 9.9 HP recommended and 15 HP maximum for propulsion selection.
• Outboard weight must not exceed 50 kg, requiring engine selection within the stated transom-loading limit before rigging.

Hull, Deck, and Capacity

An internal length of 2.26 m, or 7 ft 5 in, and an internal width of 0.79 m, or 2 ft 7 in, define the stated usable hull space. A 0.41 m, or 16 in, tube diameter accompanies the aluminum V-hull, flat floor, keel guard, and three-chamber tube configuration.

Included equipment consists of an aluminum removable rowing bench, heavy-duty single rub rail, full-length aluminum keel guard, oars with molded oarlocks, bow lifting eye, and towing rings. Leafield C7 Push-Push valves serve the buoyancy chambers. Keep passenger loading, payload, outboard shaft length, engine output, and engine weight within the stated limits.

Why Choose the AB Inflatables Lammina 10 UL Rigid Inflatable Boat

The Lammina 10 UL rigid inflatable boat combines a 3.05 m aluminum V-hull with a single flat aluminum floor, removable rowing bench, full-length keel guard, and three ORCA CSM buoyancy chambers. Its 49 kg net weight, four-person ISO capacity, 450 kg payload rating, short-shaft outboard requirement, 9.9 HP recommended power, 15 HP maximum power, and 50 kg engine limit provide comparison points for a lightweight open aluminum tender.

Setup and Outboard Considerations

Included components cover an aluminum removable rowing bench, single rub rail, full-length aluminum keel guard, oars with molded oarlocks, bow lifting eye, and towing rings. Match the transom with a 15-inch short-shaft outboard, then keep engine output at or below 15 HP and engine weight at or below 50 kg. Inflate the three buoyancy chambers through the Leafield C7 Push-Push valves.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and aluminum hull structure. Before checkout, Mulmarine.com can help you review the 3.05 m hull dimensions, 49 kg net weight, 450 kg payload limit, short-shaft outboard requirement, and 50 kg engine-weight limit against your lifting, trailer, storage, and propulsion plan. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Lammina 10 UL Rigid Inflatable Boat

Confirm that your lifting, trailer, storage, and dock plan supports the 3.05 m overall length and 49 kg net weight. You should use a 15-inch short-shaft outboard, select 9.9 HP as the recommended power level, avoid exceeding 15 HP or 50 kg engine weight, and remain within the four-person and 450 kg maximum capacity limits.