AB Lammina 13 AL 13′ Open Aluminum Inflatable Boat

Description

Constructed with a 3.18 mm, or 1/8 inch, powder-coated aluminum deep-V hull, the AB Inflatables Lammina 13 AL is a 3.96 m, or 13 ft, open aluminum-hull inflatable boat and yacht tender. Its flat aluminum deck uses anti-slip rubber pads, while three buoyancy chambers use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams. The 112 kg, or 247 lb, net weight should be included in the planned lifting, storage, trailer, and dock arrangement.

Six persons may be carried within the ISO capacity, and the maximum payload is 700 kg, or 1,543 lb. A 20-inch long-shaft outboard matches the specified transom configuration, with 30 HP recommended, 40 HP maximum, and 105 kg, or 231 lb, maximum engine weight. Leafield C7 Push-Push valves serve the three buoyancy chambers, and CE Category C applies to the stated inshore and coastal classification.

Key Specifications of the AB Inflatables Lammina 13 AL Rigid Inflatable Boat

• The open aluminum-hull yacht tender measures 3.96 m, or 13 ft, overall and has a 112 kg net weight for lifting planning.
• A powder-coated 3.18 mm aluminum deep-V hull includes a keel guard, defining the documented rigid-hull construction for this open tender.
• Powder-coated aluminum forms the flat deck, while anti-slip rubber pads establish the specified deck surface for open-layout planning.
• Three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the documented tube construction.
• ISO capacity is six persons, and the 700 kg maximum payload sets the stated passenger and cargo limit.
• A 20-inch long-shaft outboard is required, with 30 HP recommended and 40 HP maximum for propulsion selection.
• Outboard weight must not exceed 105 kg, requiring engine selection within the stated transom-loading limit before rigging.

Hull, Deck, and Capacity

An internal length of 2.90 m, or 9 ft 6 in, and an internal width of 0.94 m, or 3 ft 1 in, define the stated usable hull space. A 0.46 m, or 18 in, tube diameter accompanies the deep-V aluminum hull, flat deck, keel guard, and three-chamber tube arrangement.

Included equipment consists of an aluminum removable rowing bench, bow locker with cushion, heavy-duty rub rail, full-length keel guard, oars with molded oarlocks, lifting eyes, and towing rings. CE Category C applies to the stated inshore and coastal category. Keep passenger, payload, and outboard figures within the documented limits.

Why Choose the AB Inflatables Lammina 13 AL Rigid Inflatable Boat

The Lammina 13 AL rigid inflatable boat combines a 3.96 m aluminum deep-V hull with an open deck, removable rowing bench, bow locker, full-length keel guard, and three ORCA CSM buoyancy chambers. Its 112 kg net weight, six-person ISO capacity, 700 kg payload rating, 20-inch long-shaft requirement, 30 HP recommended power, 40 HP maximum power, and 105 kg engine limit create clear comparison points for an open aluminum yacht tender.

Setup and Outboard Considerations

Included components cover an aluminum removable rowing bench, bow locker with cushion, rub rail, full-length keel guard, oars with molded oarlocks, lifting eyes, and towing rings. Match the transom with a 20-inch long-shaft outboard, then keep engine output at or below 40 HP and engine weight at or below 105 kg. Inflate all three buoyancy chambers through the Leafield C7 Push-Push valves before use.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and aluminum hull structure. Before checkout, Mulmarine.com can help you review the 3.96 m hull dimensions, 112 kg net weight, 700 kg payload limit, 20-inch long-shaft outboard requirement, and 105 kg engine-weight limit against your lifting, storage, trailer, and propulsion plan. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Lammina 13 AL Rigid Inflatable Boat

Confirm that your lifting, trailer, storage, and dock plan supports the 3.96 m overall length and 112 kg net weight. You should use a 20-inch long-shaft outboard, select 30 HP as the recommended power level, avoid exceeding 40 HP or 105 kg engine weight, and remain within the six-person and 700 kg maximum capacity limits.