AB Lammina 8 UL – 2.56m ALU Hull Inflatable Boat (SIB)

Description

Using a powder-coated 2.28 mm, or 0.090 inch, aluminum V-hull, the AB Inflatables Lammina 8 UL is a 2.56 m, or 8 ft 5 in, ultra-light open aluminum tender with a single flat floor. Non-skid rubber pads cover the aluminum deck, while two buoyancy chambers use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams. The 34 kg, or 75 lb, net weight should be considered when arranging lifting, storage, transport, and onboard handling.

ISO capacity is four persons, and the 380 kg, or 838 lb, maximum payload applies to passenger and cargo loading. A 15-inch short-shaft outboard matches the transom configuration, with 5 HP recommended, 8 HP maximum, and 38 kg, or 84 lb, maximum engine weight. Leafield C7 Push-Push valves serve the two buoyancy chambers, and CE Category D applies to the stated sheltered-waters classification.

Key Specifications of the AB Inflatables Lammina 8 UL Rigid Inflatable Boat

• The ultra-light open aluminum tender measures 2.56 m, or 8 ft 5 in, overall and has a 34 kg net weight.
• A powder-coated 2.28 mm aluminum V-hull includes a keel guard, defining the documented rigid-hull construction for this compact tender.
• The single flat aluminum floor uses non-skid rubber pads, establishing the specified deck surface for the open tender layout.
• Two buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the documented tube construction.
• ISO capacity is four persons, and the 380 kg maximum payload sets the stated passenger and cargo limit.
• A 15-inch short-shaft outboard is required, with 5 HP recommended and 8 HP maximum for propulsion selection.
• Outboard weight must not exceed 38 kg, requiring engine selection within the stated transom-loading limit before rigging.

Hull, Deck, and Capacity

An internal length of 1.79 m, or 5 ft 10 in, and an internal width of 0.70 m, or 2 ft 4 in, define the stated usable hull space. A 0.41 m, or 16 in, tube diameter accompanies the aluminum V-hull, single floor, keel guard, and two-chamber tube configuration.

Included equipment consists of an aluminum removable rowing bench, heavy-duty single rub rail, full-length aluminum keel guard, oars with molded oarlocks, bow lifting eye, and towing rings. CE Category D applies to sheltered waters. Keep passenger, payload, outboard-power, and engine-weight figures within the stated limits.

Why Choose the AB Inflatables Lammina 8 UL Rigid Inflatable Boat

The Lammina 8 UL rigid inflatable boat combines a 2.56 m aluminum V-hull with a single flat floor, removable rowing bench, full-length keel guard, and two ORCA CSM buoyancy chambers. Its 34 kg net weight, four-person ISO capacity, 380 kg payload rating, CE Category D designation, 15-inch short-shaft requirement, 5 HP recommended power, 8 HP maximum power, and 38 kg engine limit provide clear comparison points for a compact lightweight tender.

Setup and Outboard Considerations

Included components cover an aluminum removable rowing bench, single rub rail, full-length aluminum keel guard, oars with molded oarlocks, bow lifting eye, and towing rings. Select a 15-inch short-shaft outboard before rigging, then keep engine output at or below 8 HP and engine weight at or below 38 kg. Inflate both buoyancy chambers through the Leafield C7 Push-Push valves.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and aluminum hull structure. Before checkout, Mulmarine.com can help you review the 2.56 m hull dimensions, 34 kg net weight, 380 kg payload limit, short-shaft outboard requirement, and 38 kg engine-weight limit against your lifting, storage, transport, and propulsion plan. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Lammina 8 UL Rigid Inflatable Boat

Confirm that your lifting, storage, and dock plan supports the 2.56 m overall length and 34 kg net weight. You should use a 15-inch short-shaft outboard, select 5 HP as the recommended power level, avoid exceeding 8 HP or 38 kg engine weight, and remain within the four-person and 380 kg maximum capacity limits.