AB Lammina 9 AL – 9-Foot 1-Inch Aluminum Hull Inflatable Boat

Description

At 2.76 m, or 9 ft 1 in, the AB Inflatables Lammina 9 AL combines a powder-coated 3.18 mm, or 1/8 inch, aluminum deep-V hull with a flat deck and full-length keel guard. Anti-slip rubber pads cover the aluminum deck, while three buoyancy chambers use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams. The 54 kg, or 119 lb, net weight should be included in the planned lifting, trailer, dock, and storage arrangement.

ISO capacity is four persons, and the 400 kg, or 882 lb, maximum payload applies to passenger and cargo loading. A 15-inch short-shaft outboard matches the transom configuration, with 8 HP recommended, 10 HP maximum, and a 42 kg, or 93 lb, engine-weight limit. Leafield C7 Push-Push valves serve the three buoyancy chambers, while CE Category C applies to the stated inshore and coastal classification.

Key Specifications of the AB Inflatables Lammina 9 AL Rigid Inflatable Boat

• The open aluminum-hull yacht tender measures 2.76 m, or 9 ft 1 in, overall and has a 54 kg net weight.
• A powder-coated 3.18 mm aluminum deep-V hull includes a full-length keel guard, defining the documented rigid-hull construction for this tender.
• Powder-coated aluminum forms the flat deck, while anti-slip rubber pads establish the specified deck surface for open-layout planning.
• Three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the documented tube construction.
• ISO capacity is four persons, and the 400 kg maximum payload sets the stated passenger and cargo limit.
• A 15-inch short-shaft outboard is required, with 8 HP recommended and 10 HP maximum for propulsion selection.
• Outboard weight must not exceed 42 kg, requiring engine selection within the stated transom-loading limit before rigging.

Hull, Deck, and Capacity

An internal length of 1.98 m, or 6 ft 6 in, and an internal width of 0.70 m, or 2 ft 4 in, define the stated usable hull space. A 0.41 m, or 16 in, tube diameter accompanies the deep-V aluminum hull, flat deck, keel guard, and three-chamber tube configuration.

Included equipment consists of an aluminum removable rowing bench, bow locker with cushion, heavy-duty rub rail, full-length aluminum keel guard, oars with molded oarlocks, lifting eyes, and towing rings. Inflate the three buoyancy chambers through the Leafield C7 Push-Push valves, then keep passenger, payload, outboard-power, and engine-weight figures within the stated limits.

Why Choose the AB Inflatables Lammina 9 AL Rigid Inflatable Boat

The Lammina 9 AL rigid inflatable boat combines a 2.76 m aluminum deep-V hull with an open deck, removable rowing bench, bow locker, full-length keel guard, and three ORCA CSM buoyancy chambers. Its 54 kg net weight, four-person ISO capacity, 400 kg payload rating, 15-inch short-shaft requirement, 8 HP recommended power, 10 HP maximum power, and 42 kg engine limit provide defined comparison points for a compact open aluminum yacht tender.

Setup and Outboard Considerations

Included components cover an aluminum removable rowing bench, bow locker with cushion, heavy-duty rub rail, full-length keel guard, oars with molded oarlocks, lifting eyes, and towing rings. Match the transom with a 15-inch short-shaft outboard, then keep engine output at or below 10 HP and engine weight at or below 42 kg. Inflate all three buoyancy chambers through the Leafield C7 Push-Push valves.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and aluminum hull structure. Mulmarine.com can help you review the 2.76 m hull dimensions, 54 kg net weight, 400 kg payload limit, short-shaft outboard requirement, and 42 kg engine-weight limit against your lifting, trailer, storage, and propulsion plan before purchase. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Lammina 9 AL Rigid Inflatable Boat

Confirm that your lifting, trailer, dock, and storage plan supports the 2.76 m overall length and 54 kg net weight. You should use a 15-inch short-shaft outboard, select 8 HP as the recommended power level, avoid exceeding 10 HP or 42 kg engine weight, and remain within the four-person and 400 kg maximum capacity limits.