Aquaglide Escalade Yacht Climbing Wall

Description

A 16 ft 5 in vertical frame makes theAquaglide Escaladea Yacht Series over-water inflatable climbing wall. The Duratex 0.90 mm reinforced PVC structure inflates to 7 ft by 3 ft 3 in by 16 ft 5 in. It supports one climber within a stated 250 lbs maximum load.

Heavy-duty yacht-side mounting straps, D-rings, and universal hull tie-offs form the listed mounting interface. The rigid inflatable frame operates at 3.0 PSI. A minimum water depth of 10 ft provides the listed fall-zone clearance under the climbing wall.

Key Features of the Escalade Yacht Climbing Wall

• Duratex 0.90 mm reinforced PVC forms the listed Yacht Series climbing-wall construction.
• At 16 ft 5 in high, the wall requires the listed 10 ft water-depth clearance.
• One climber can use the structure within the listed 250 lbs maximum load.
• Inflated dimensions measure 7 ft by 3 ft 3 in by 16 ft 5 in.
• Yacht-side straps, D-rings, and hull tie-offs form the listed mounting interface.
• The rigid inflatable frame operates at the listed 3.0 PSI pressure.
• The 128 lbs dry weight supports handling and yacht-side installation planning.

Use and Capacity

The Escalade is a Yacht Series vertical over-water inflatable climbing wall. It supports one climber at a time within the listed 250 lbs maximum load. The 10 ft minimum water depth provides the listed fall-zone clearance under the 16 ft 5 in-high inflated frame.

Operators should maintain the listed 3.0 PSI frame pressure. The available product details do not list a pump, mooring system, repair kit, safety equipment, hull-protection materials, or specific yacht compatibility as included.

Materials and Construction

Duratex 0.90 mm heavy-duty reinforced commercial PVC forms the listed climbing-wall structure. Heavy-duty yacht-side straps, D-rings, and universal hull tie-offs provide the listed mounting interface. The rigid inflatable frame operates at the listed 3.0 PSI pressure.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC surfaces, mounting straps, D-rings, hull tie-offs, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for yacht-side mounting, inflation, cleaning, and storage.

Installation and Setup

The Aquaglide climbing wall inflates to 7 ft by 3 ft 3 in by 16 ft 5 in and weighs 128 lbs when dry. Installers should verify at least 10 ft of water depth, yacht-side mounting space, strap routing, hull tie-off points, and clear fall-zone area before deployment.

Inflate the rigid frame to the listed 3.0 PSI operating pressure. The provided product data does not confirm a pump, hull-protection system, mounting hardware, repair kit, or safety equipment as included.

Care and Operating Notes

Rinse the PVC surface, straps, D-rings, tie-offs, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect straps, D-rings, tie-off points, seams, valves, and visible PVC surfaces before operation. Follow manufacturer instructions for inflation, yacht-side mounting, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Escalade carries a 3-year limited commercial fleet warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the yacht-side location provides suitable strap and tie-off points with at least 10 ft of water depth below the wall. Plan for one climber within the 250 lbs maximum load, maintain 3.0 PSI frame pressure, allow for the 7 ft by 3 ft 3 in by 16 ft 5 in inflated structure, and account for the 128 lbs dry weight during setup.