Aquaglide Lugeway 20

Description

Extending a dual-level Aquapark thoroughfare to 19 ft 8 in, theAquaglide Lugeway 20provides an extended balancing runway for up to eight concurrent transit users. Its Duratex 0.90 mm reinforced PVC structure uses HA Weld seams and supports a stated 1,600 lbs total payload. The 1 ft 4 in-high runway operates at 2.0 PSI.

Vario-Lock 10 provides the listed dual-ended track compatibility. Four reinforced marine-grade stainless steel D-rings form the mooring points. The extended runway weighs 90 lbs when dry.

Key Features of the Lugeway 20 Runway

• Duratex 0.90 mm reinforced PVC forms the listed extended dual-level balancing-runway construction.
• HA Weld technology provides the listed hot-air welded structural seam system.
• Inflated dimensions measure 19 ft 8 in by 7 ft 10 in by 1 ft 4 in.
• Eight transit users can occupy the runway within the listed 1,600 lbs total payload.
• The structural chamber operates at the listed 2.0 PSI pressure.
• Vario-Lock 10 provides the listed dual-ended track connection compatibility.
• Four reinforced marine-grade stainless steel D-rings provide the listed mooring points.
• The 90 lbs dry weight supports handling and deployment planning.

Use and Capacity

The Lugeway 20 is classified as an extended dual-level balancing runway and main obstacle thoroughfare. It supports up to eight concurrent transit users within the listed 1,600 lbs total payload. Vario-Lock 10 provides the listed dual-ended track connection system.

Operators should maintain the listed 2.0 PSI structural pressure. The available product details do not list water-depth requirements, a pump, anchor system, mooring lines, repair kit, or safety equipment as included.

Materials and Construction

Duratex 0.90 mm reinforced PVC forms the listed extended runway structure. HA Weld hot-air welded seams provide the listed seam technology. Vario-Lock 10 straps and four reinforced stainless steel D-rings form the listed connection and mooring hardware.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, runway surfaces, D-rings, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide runway inflates to 19 ft 8 in by 7 ft 10 in by 1 ft 4 in and weighs 90 lbs when dry. Installers should plan the Vario-Lock 10 dual-ended track layout, allow clearance along the full runway length, and identify four mooring positions before deployment.

Inflate the structural chamber to the listed 2.0 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC runway, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect runway surfaces, straps, D-rings, seams, valves, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Lugeway 20 carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the planned Aquapark layout uses Vario-Lock 10 compatible dual-ended connections and has room for the 19 ft 8 in by 7 ft 10 in runway. Plan for no more than eight transit users within the 1,600 lbs total payload, maintain 2.0 PSI structural pressure, account for the 90 lbs dry weight, and arrange four mooring points.