FREE DELIVERY TODAY - Place your 1st order.
Webasto S6 – BlueCool S Series 230V – 6,000 BTU’s
The Webasto S6 BlueCool S Series delivers 6,000 BTU capacity through 230V power for compact marine interior climate control.
- 6,000 BTU output suits small cabins.
- 230V input requires compatible power.
- BlueCool S Series identifies the platform.
- Capacity fits limited interior spaces.
- Webasto S6 identifies the model.
Products are almost sold out
available only:
3In Stock
Description
Small compartments need appropriately sized equipment, especially when available electrical capacity and installation space are limited. The Webasto BlueCool S6 230V provides 6,000 BTU/h of cooling and 6,000 BTU/h of reverse-cycle heating. Its 1.76 kW cooling capacity, 147 CFM airflow, and application guidance for spaces up to 250 cubic feet suit compact international cruiser layouts.
Key Features Webasto BlueCool S6 230V
This compact marine heat pump focuses its capacity on smaller onboard compartments.
- Compact Compartment Capacity Provides 6,000 BTU/h cooling for spaces up to 250 cubic feet.
- Reverse-Cycle Heating Adds 6,000 BTU/h heating for cooler cabin conditions.
- 230V International Power Connects with compatible 50 or 60 hertz systems.
- Low Airflow Requirement Delivers 147 CFM through a four-inch duct connection.
- Seawater Cooling Circuit Uses 200 GPH flow through five-eighth-inch connections.
- Compact Drainage Design Uses a deep composite tray for marine installation planning.
Technical Specifications
- Model: BlueCool S6, 230V Variant
- Cooling capacity: 6,000 BTU/h or 1.76 kW
- Heating capacity: 6,000 BTU/h through reverse-cycle operation
- Electrical supply: 230V, 50/60 Hz, single phase
- Running current: 2.3 A cooling and 2.6 A heating
- Breaker requirement: 15 A maximum with 11 A LRA
- Refrigerant and compressor: R-410A with hermetic rotary compressor
- Seawater flow: 3.33 GPM or 200 GPH
- Airflow and duct: 147 CFM through a four-inch connection
- Dimensions and weight: 12.2 x 15.7 x 13.4 inches; 46.3 lbs
Application and Installation Notes
The BlueCool S6 230V is configured for international shore networks or modular global cruiser systems. Its application guidance identifies small compartments up to 250 cubic feet and lists a minimum generator capacity of 1.5 kW. Before installation, verify the 230V supply, 15 A breaker, 200 GPH seawater flow, four-inch duct route, half-inch condensate drain, five-eighth-inch water connections, and service clearance.
Who This Unit Is Not Ideal For
This unit is not intended for large salons or cabins that require more than 6,000 BTU/h. It may also be unsuitable for 115V-only boats or spaces with unusually high heat loads. Final sizing should consider insulation, windows, ventilation, and cabin volume.
Warranty and Product Summary
The Webasto BlueCool S6 includes a 2-year factory warranty. Manufactured by Webasto in Germany, it combines 230V cooling and reverse-cycle heating with compact airflow delivery for smaller marine spaces.
| Brand | Webasto |
| Exact Model Code / SKU | BlueCool S6 (230V Variant) |
| Country of Origin | Germany |
| System Architecture | Self-Contained Marine A/C System |
| Cooling Capacity - BTU/h | 6,000 BTU/h |
| Cooling Capacity - kW/Watts | 1.76 kW |
| Heating Capacity - BTU/h | 6,000 BTU/h |
| Reverse Cycle Heating Function | Yes |
| Electrical Voltage | 230V |
| Alternating Current Frequency | 50/60 Hz |
| Electrical Phase | Single Phase |
| Full Load Amps - FLA Cooling | 2.3 A |
| Full Load Amps - FLA Heating | 2.6 A |
| Locked Rotor Amps - LRA | 11 A |
| Max Circuit Breaker Size | 15 A |
| Refrigerant Type | R-410A |
| Compressor Type | Hermetic Rotary |
| Seawater Water Flow Rate | 3.33 GPM (200 GPH) |
| Seawater Inlet Pipe Size | 5/8 inch (16 mm) |
| Seawater Outlet Pipe Size | 5/8 inch (16 mm) |
| Evaporator Airflow Capacity | 147 CFM (250 m³/h) |
| Duct Discharge Connection Diameter | 4 inches (102 mm) |
| Condensate Drain Connection Size | 1/2 inch (12.7 mm) |
| Physical Dimensions - Unit | 12.2 x 15.7 x 13.4 inches (310 x 400 x 340 mm) |
| Net Weight | 46.3 lbs (21.0 kg) |
| Chassis & Condenser Material | Extra-Deep Composite Condensate Tray & Cupronickel Condenser Coil |
| Standard Factory Warranty | 2 Years |
| Application & Sizing Guidance | Compact 230V system configured for international shore networks or modular global cruiser systems; services small compartments up to 250 cu.ft, min generator 1.5 kW. |
What's in the Box
- 1x Webasto BlueCool S-Series S6 6,000 BTU Self-Contained Marine Air Conditioner Unit (230V)
- 1x Extra-Quiet 360-Degree Rotatable Centrifugal Blower Assembly
- 1x High-Efficiency Corrosion-Proof Titanium Condenser Coil
- 1x Composite Deep-Draw Condensate Drain Pan with ABS Tray
- 1x Next-Generation BlueCool Electronic Control Board
- 1x Removable and Washable Return Air Filter
- 1x User Manual and Technical Specification Guide
Webasto S6 230V Marine AC FAQ
What are the electrical requirements for S6?
Webasto S6 operates safely on a 230V power supply. This single-phase network installation draws minimal running current, allowing long-distance coastal cruisers to distribute small cabin climate loads smoothly over international shore grids or standard yacht generator circuits without overtaxing low-amperage harbor electrical boxes.
What airflow volume does this system deliver?
Webasto S6 generates an airflow volume of 165 CFM. The integrated rotatable high-velocity centrifugal blower fan operates dynamically to flush hot humidity profiles from cramped living spaces while keeping system resonance decibels extremely low against lightweight composite structural hull partitions and marine plywood cabin walls.
Which vessels fit the Webasto S6?
Webasto S6 is designed for micro-cruisers and small crew quarters. It provides optimal localized cooling coverage for recreational watercraft and sailing vessels from twenty to twenty-six feet, integrating a high-efficiency corrosion-proof titanium condenser loop to handle high-salinity brackish water flows over years of operation.
| System Attribute | Factory Value |
|---|---|
| Thermal Output | 6,000 BTU |
| Net Weight | 41.4 lbs |
| Duct Size | 4 inches |
| Inlet Connection | 5/8 inch |
You must be logged in to post a review.
Reviews
There are no reviews yet.