FREE DELIVERY TODAY - Place your 1st order.
Reverso FPS 210 Fuel Polishing System – 120V – 210 GPH – Digital Controller
Conditioning diesel in 1,000-gallon marine tanks, the Reverso FPS 210 120V filters 210 GPH at 120V AC, deploying an internal gear pump and Racor 1000 turbine separator to remove water and sludge.
- 210 GPH capacity cleans large tanks.
- 120V single-phase motor connects standard power.
- PLC interface schedules automated maintenance cycles.
- Racor 1000 core removes particulates.
- 1/2″ flare fittings ensure leakproof connections.
Products are almost sold out
available only:
10In Stock
Description
Schedule diesel fuel polishing on 120V AC power with the Reverso FPS 210 Fuel Polishing System – 120V – 210 GPH – Digital Controller. This automated marine diesel fuel polishing and conditioning system is specified for commercial workboats, sportfishers, and shore-side diesel storage systems, with a 210 GPH (795 LPH/3.5 GPM) continuous processing capacity.
The FPS-210-120V uses 120V AC, 60Hz single-phase power and a Racor 1000 Series compatible turbine separation chamber. Its digital PLC interface provides programmable auto-cycle scheduling, while the continuous-duty heavy-duty internal gear pump, 1/2-inch male flare SAE 45-degree fittings, and white powder-coated marine aluminum housing support the listed system configuration.
Key Features of Reverso FPS 210
- Automated marine diesel fuel polishing and conditioning system supports the listed diesel fuel service application.
- 210 GPH (795 LPH/3.5 GPM) continuous processing capacity identifies the listed processing rate.
- 120V AC, 60Hz single-phase power matches the listed electrical requirement.
- Racor 1000 Series compatible turbine separation chamber identifies the listed primary filtration core.
- Digital PLC interface provides programmable auto-cycle scheduling.
- System is optimized for marine diesel storage tanks up to 1,000 gallons (3,785 liters).
- Continuous-duty heavy-duty internal gear pump provides the specified pumping technology.
- 1/2-inch male flare SAE 45-degree inlet and outlet fittings identify the plumbing connection style.
- White powder-coated marine aluminum housing provides the listed enclosure construction.
- Measures 20.5 x 14.5 x 8.5 inches (521 x 368 x 216 mm) and has a dry weight of 45.0 lb (20.4 kg).
Fitment and Maintenance Use
The Reverso FPS-210-120V is specified for commercial workboats, sportfishers, and shore-side diesel storage systems. It supports automated diesel fuel polishing and conditioning with a 120V AC, 60Hz single-phase power supply and is optimized for marine diesel storage tanks up to 1,000 gallons. Confirm fitment using the engine model, serial number, and manufacturer service documentation before ordering.
Installation and Service Considerations
Confirm that the installation has 120V AC, 60Hz single-phase power and compatible plumbing for the 1/2-inch male flare SAE 45-degree inlet and outlet fittings. Check that the installation location can accommodate the 20.5 x 14.5 x 8.5 inch housing. Use the digital PLC interface and programmable auto-cycle scheduling according to the listed product instructions. Follow the engine manufacturer’s service manual and the product instructions for installation and service procedures. Verify the engine model and serial number before service.
Before Ordering the Reverso FPS 210
Confirm that Reverso Pumps part number FPS-210-120V is suitable for your commercial workboat, sportfisher, or shore-side diesel storage system. Verify the 120V AC, 60Hz single-phase requirement, 210 GPH (795 LPH/3.5 GPM) continuous processing capacity, Racor 1000 Series compatible separation chamber, programmable digital PLC interface, stated 1,000-gallon tank optimization, continuous-duty internal gear pump, 1/2-inch male flare fittings, white marine aluminum housing, and 20.5 x 14.5 x 8.5 inch installation footprint. Confirm compatibility with your engine manufacturer’s documentation before purchase.
Reverso FPS 210 Fuel Polishing System - 120V
| Brand | Reverso Pumps |
|---|---|
| Manufacturer Part Number (MPN) | FPS-210-120V |
| Country of Origin | USA |
| System Classification | Automated Marine Diesel Fuel Polishing & Conditioning System |
| Flow Rate Performance | 210 GPH (795 LPH / 3.5 GPM) Continuous Processing |
| Operating Voltage & Frequency | 120V AC / 60Hz Single-Phase Power |
| Primary Filtration Core | Racor 1000 Series Compatible Turbine Separation Chamber |
| Controller Architecture | Digital PLC Interface with Programmable Auto-Cycle Scheduling |
| Recommended Tank Capacity | Optimized for Marine Diesel Storage Tanks up to 1,000 Gallons (3,785 Liters) |
| Internal Pump Technology | Continuous-Duty Heavy-Duty Internal Gear Pump |
| Plumbing Connections | 1/2" Male Flare (SAE 45°) In/Out Fittings |
| Cabinet Enclosure | White Powder-Coated Marine Aluminum Housing |
| Dimensions & Dry Weight | 521 x 368 x 216 mm (20.5" x 14.5" x 8.5") / 20.4 kg (45.0 lbs) |
| Compliance Certifications | CE Approved / UL Listed Internal Electrical Components |
| Service Target Application | Commercial Workboats, Sportfishers & Shore-Side Diesel Storage Systems |
| Standard Warranty | 1 Year Limited Manufacturer Warranty |
You must be logged in to post a review.
Reviews
There are no reviews yet.