Phasor K3-14.0 – 14kW Diesel Marine Generator 60Hz 1800 RPM

Description

The Phasor K3-14.0 is a low-speed marine diesel generator for vessels requiring 14 kW of 120/240V single-phase 60Hz AC power. It uses a Kubota V1505-T-E4BG four-cylinder turbocharged diesel engine at 1,800 RPM with a direct-coupled brushless generator and solid-state voltage regulation. The generator is supplied in open-frame configuration, with an optional sound enclosure available for installations that require additional sound attenuation.

The generator uses freshwater heat-exchanger cooling with raw-water circulation. It includes a deluxe remote instrument panel with oil-pressure, coolant-temperature, voltage, and hour-meter monitoring plus automatic shutdown protection. A properly designed marine installation must provide fuel supply and return, seawater intake and strainer, wet exhaust, ventilation, starting battery, AC distribution, grounding, circuit protection, and shore-power transfer equipment.

Key Specifications

• Low-speed marine diesel generator for 120/240V single-phase 60Hz AC systems.
• Provides 14 kW continuous output at 1,800 RPM.
• Uses a Kubota V1505-T-E4BG turbocharged four-cylinder diesel engine with approximately 1,498 cc displacement.
• Provides 120/240V output with approximately 117A at 120V or 58A at 240V.
• Uses a direct-coupled brushless generator with solid-state voltage regulation.
• Uses freshwater heat-exchanger cooling with a bronze raw-water impeller pump.
• Consumes approximately 1.2 US gallons per hour, or 4.54 L per hour, at full load.
• Measures approximately 965 mm by 533 mm by 610 mm and weighs approximately 272 kg.

Electrical Compatibility

This generator is designed for 120/240V single-phase 60Hz electrical systems. Confirm actual continuous demand, simultaneous operation, power factor, largest motor-starting surge, and AC distribution requirements before selecting a 14 kW unit. High-demand loads such as air conditioning, battery chargers, watermakers, galley equipment, refrigeration, pumps, and workshop equipment should be included in the load plan.

Confirm whether an optional sound enclosure is needed for the vessel’s installation environment. The generator’s nominal rating should not be used as the sole basis for determining safe operation under combined or inductive loads.

Installation Considerations

Install the generator on a rigid vibration-isolated base with clearance for oil, filters, coolant, raw-water pump, turbocharger area, exhaust, electrical terminals, and optional enclosure components. Provide secure fuel plumbing, seawater intake and strainer, wet exhaust, ventilation, starting battery, AC breakers, grounding, and shore-power transfer isolation. Installation and commissioning should be completed by a qualified marine generator technician.

Before Ordering

Confirm required continuous and surge load within 14 kW, 120/240V single-phase 60Hz compatibility, available installation space, structural support for approximately 272 kg, open-frame or sound-enclosure requirement, diesel fuel layout, raw-water intake, exhaust route, ventilation capacity, starting-battery circuit, AC distribution and transfer-switch design, grounding plan, service access, and qualified installation requirements before purchase.