Teltonika RUTX11 Dual-SIM 4G LTE WiFi Marine Router

Description

Route cellular, Wi-Fi, GNSS, and Bluetooth connections with the Teltonika RUTX11 Dual-SIM 4G LTE WiFi Marine Router. This industrial dual-SIM Gigabit LTE and dual-band Wi-Fi marine router is specified for high-density multi-user internet routing, local radar or multifunction-display video backplanes, and international roaming on performance cruisers and sailing yachts.

Teltonika Networks model RUTX11 supports 4G LTE Category 6 with 3G and 2G fallback, listed maximum speeds of 300 Mbps download and 50 Mbps upload, plus dual-band 2.4 GHz and 5 GHz Wi-Fi. It has two mobile SMA terminals, two Wi-Fi RP-SMA terminals, one GNSS SMA terminal, and one Bluetooth SMA connector, with dual Mini-SIM automatic switching rules.

Key Features of Teltonika RUTX11

• Industrial dual-SIM Gigabit LTE and dual-band Wi-Fi router supports the listed high-density vessel-network application.
• 4G LTE Category 6 with 3G and 2G fallback identifies the listed cellular-network technologies.
• 300 Mbps maximum download and 50 Mbps maximum upload identify the listed LTE Category 6 structural peak rates.
• Dual-band Wi-Fi supports the listed 2.4 GHz and 5 GHz wireless bands.
• Two mobile SMA terminals define the listed cellular-antenna connection count.
• Two Wi-Fi RP-SMA, one GNSS SMA, and one Bluetooth SMA connector identify the listed antenna interfaces.
• Dual Mini-SIM slots support the listed switching rules for signal drop, data limit, and roaming triggers.
• 9V to 50V DC input supports the listed wide-range vessel-power interface.
• Idle 4W and maximum 18W data-transmission load identify the listed power-consumption range.
• Four Gigabit RJ45 ports provide the listed one configurable WAN and three LAN connections.

Network Compatibility and Use

The Teltonika RUTX11 is specified for performance cruisers and sailing yachts from 25 to 65 ft using high-density multi-user routing, local radar or multifunction-display video networking, and dual-SIM international roaming. Its dual Mini-SIM slots, antenna terminals, one configurable WAN port, three LAN ports, and connected network devices must match the vessel network design. The listed maximum LTE rates do not is designed to support actual internet performance, which depends on carrier service, plan, coverage, signal conditions, network load, and configuration. Confirm compatibility with your router, modem, antenna system, vessel network, and manufacturer documentation before ordering.

Installation and Service Considerations

Verify compatible mobile, Wi-Fi, GNSS, and Bluetooth antennas for the two mobile SMA, two Wi-Fi RP-SMA, one GNSS SMA, and one Bluetooth SMA terminals. Confirm a 9V to 50V DC supply, account for the 4W idle and 18W maximum power draw, and plan the dual Mini-SIM, WAN, LAN, and DIN-rail mounting arrangement. The IP30 anodized aluminum enclosure is specified with integrated DIN-rail structural backplanes. The product measures 4.53 x 3.74 x 1.73 inches (11.5 x 9.5 x 4.4 cm) and weighs 1.0 lb (0.45 kg). Follow the product instructions and your vessel electronics manufacturer’s documentation for mounting, cabling, power connections, sealing, and network setup.

Before Ordering the Teltonika RUTX11

Verify that Teltonika Networks model RUTX11 matches your performance-cruiser or sailing-yacht network plan. Confirm the industrial dual-SIM router type, 4G LTE Category 6 with 3G and 2G fallback, 300 Mbps maximum download, 50 Mbps maximum upload, dual-band 2.4 GHz and 5 GHz Wi-Fi, two mobile SMA terminals, two Wi-Fi RP-SMA terminals, one GNSS SMA terminal, one Bluetooth SMA connector, dual Mini-SIM slots with smart switching, 9V to 50V DC input, 4W idle and 18W maximum power consumption, four Gigabit RJ45 ports with one configurable WAN and three LAN ports, IP30 anodized aluminum DIN-rail enclosure, 4.53 x 3.74 x 1.73 inch dimensions, 1.0 lb dry weight, and 2-year factory limited component protection. Confirm compatibility with your router, modem, antenna system, vessel network, and manufacturer documentation before purchase.